How to connect the Internet to a new computer. How to set up Internet on a laptop
Such a popular OS Windows 7 without an Internet connection turns into an ordinary and unremarkable system. But its peculiarity is that you can access the Internet from anywhere in the world. When wondering how to do it on Windows 7, it’s worth deciding what type of connection is being used.
General settings
Before you connect to the Internet on Windows 7, you need to connect a modem to your computer. Regardless of what type of device you are using, General settings are displayed equally. Therefore, when choosing a switch for Internet surfing, focus on the capabilities of your computer. For example, Wi-Fi does not work on all PCs, and 3G modems do not always pick up the signal well in apartments.
Control Panel
To enter the Network settings mode, you need to open the “Control Panel” tab. It is located in the Start menu. Those who are wondering “how to set up the Internet on Windows 7” need the “Network and Internet” tab, “Network and Sharing Center” shared access».
New connection
Difficulties may arise in the “Setting up a new connection” section, since you need to connect your specific modem. For example, owners of a “whistle” from a cellular operator (3G modem) can simply connect the device, autostart the drivers and safely use the Internet. But only if it was configured correctly. If not, then the question of whether it’s on Windows 7 remains relevant.
3G modem
An unlocked “whistle” (one that was not properly prepared for use in the store) is connected in a few clicks. To do this, select “Set up a telephone connection”. Next, you should see the modem connected to the port. You need to enter the number to dial (each operator has its own, it is usually written in the instructions for the device), after which the message “The device is ready for use” should appear. That's all, you can use the services of the World Wide Web.
High speed connection
Internet drivers (Windows 7) are not required. They are already in operating system, you just need to connect the device. Select “Internet Connection” (first in the list). Please note that it must be wireless and high-speed, since only this option is suitable for ADSL modems. Be sure to select You must enter the username and password provided by your Internet service provider (for example, Rostelecom or any other). You need to find out all the data before setting up the Internet. On Windows 7, as with any other version, you cannot connect to the Internet without a password and login. After a successful connection, you can display the shortcut on the desktop so that it is always at hand, or use the icon minimized to tray (on-screen menu near the clock at the bottom of the screen).
Wi-Fi setup
Usage wireless internet has become familiar to users of personal computers, especially with an operating system such as Windows 7. Set up the Internet using Wi-Fi networks is not difficult. Modern computers Usually they already come with a signal receiver built into them. To catch him, you need:
- Turn on the router, check if everything works (simple technical steps that are described in the instructions for the device).
- On your computer, expand the tray and open the connections tab. Please note that there is a new connection available (there was none before turning on the router). The name may depend on the name of the device or service provider.
- Click the "Connect" button. Enter the Wi-Fi password provided by your ISP.
- You can check the “Connect automatically” checkbox.
- Check connection.
Some computer system models do not support Wi-Fi connections. You need to carefully study all the points in the instructions, since there is a risk of simply not connecting to the router. Moreover, new models are already being produced without the usual Ethernet cables.
Browsers for work
Microsoft, having released the operating system Windows system 7, took care of users by creating a new and improved version of the standard browser Internet Explorer. Despite the renovation, working in it is very difficult. Internet Explorer for Windows 7 can be immediately updated after connecting to the Internet, or you can even change the browser to any other (Google Chrome, Amigo, Mozila, Yandex Browser and others). In many ways, the speed of the Internet depends not only on the provider, but also on the program through which it is used. The standard browser is not very fast, even if the transfer of data from the Internet is very fast.
Possible problems
If all the steps have been completed, but the Internet still does not work, there may be several reasons for this. For example, Wi-Fi may not connect because there is no wireless adapter or it is disabled or blocked. You can check its presence by looking at the device manager of your computer. A wired connection may not work because the installed firewall or antivirus does not allow it to pass through. Check all your settings, as these programs may detect new Internet access as a threat to your computer's security. You just need to disable some functions and turn them back on after going online. Sometimes users simply enter data incorrectly when filling out a password and login when setting up equipment.
Another option is to test the device itself on other computers. It is possible that the modem or router is damaged and is not working. There’s nothing you can do about it, either seek help from a professional PC user or contact your provider.
Conclusion
Before connecting to the Internet on Windows 7, check the equipment for functionality. Then go through all the steps in the instructions for setting up the device. Check, If everything is in order, enjoy surfing the Internet. If you can't connect, try troubleshooting possible problems(for example, incorrect connection number, error in password or login, other reasons described above). If you can’t make the settings yourself, it makes sense to contact a professional.
Everyone Have a good mood! In this publication we will talk about how set up internet on your computer via cable. Moreover, friends, once upon a time, this topic Already figured it out on this blog.
But since a lot of water has passed under the bridge since then, and Windows 10 is widely used on new computers, there was an urgent need to update the information. Although, to be honest, nothing much has changed in this matter.
So, since unlimited technology is advancing by leaps and bounds across the expanses of our vast homeland, within the framework of this publication we will consider connecting via a modem that is configured in router mode.
Therefore, if someone else does not know where to plug in the network cable correctly or why you need the login and password that you were given at the subscriber point, be sure to read the following material:
After the computer is connected to a properly configured modem using a cable, there is little work left to do. You just need to configure the network card. This is done very simply, there will be no problems.
In the future, everything will be shown using Win 10 as an example, although in previous versions of this operating system everything is done by analogy. So, let's get started. Right-click on the “Start” button, and then select the “Network Connections” section:
A window will open in which you need to select a wired connection, because we are connecting via cable. It is usually called “Ethernet” or “Local Area Connection”:
Now right-click on it again and go to “Properties”. At the next stage, you need to select “IP version 4” and click the “Properties” button at the bottom:
- IP Address: When using dynamic IP, this is any value in the range from 192.168.1.2 to 192.168.1.254. If you have a permanent IP address, you should specify it;
- Subnet mask: determined automatically, do not touch anything;
- Default gateway: you should specify the IP address of the modem, which distributes the Internet to the computer via a cable.
After that, go to the item “Use the following DNS server addresses.” Here you need to specify the values that are recommended. If you don’t know them, you can use universal ones. Here they are:
At this point, it is important to understand the fact that it is thanks to these addresses that sites open in the computer browser. Therefore, they can be used to block certain resources. Look at the third row of the table above.
In short, after all the manipulations, click the “OK” button and begin to enjoy the Internet. If suddenly the sites still do not load, then it is strongly recommended to check the settings again, and then study this article:
And with this, the article on how to set up the Internet on a computer via cable has come to an end. If you have questions, be sure to ask them in the comments. And at the end look interesting video about Russian people on the Internet.
In total, there are only two options for connecting to the global Internet network to your laptop: wireless method and via a network cable. Moreover, one procedure is very different from another based on the OS version. Now let's find out how to connect wired Internet to the laptop.
Let's start setting up
Before you start setting up, you must mandatory make sure that the network cable has been connected to the computer, the network card has all the necessary drivers, and the Internet provider has started providing the Internet service.
Using the example of one of the most popular operating systems, Windows 7, the principle of connecting to the Internet will be considered. So, in order to become a member of the “global web”, you need to do the following:
The user should go to the “Control Panel”. This transition can be done from the Start menu.
We find the point that is responsible for the global network and enter it. Even on different versions operating systems, this item looks approximately the same.
At this point, go to the “Network and Sharing Center”, where the main manipulations will take place.
In the menu that appears, you need to open “Change network settings”. This item is responsible for network and Internet settings.
Now let's move on to the settings itself. To connect to the Internet, you must select the appropriate option.
For wired connection, you must select a high-speed Internet connection method.
The user is presented with a page where it is necessary to enter individual information for each user. This data can only be obtained by contacting your Internet provider, who must provide the user with his access password and login, which are necessary to connect to the Internet. Once the ISP has provided all the required data, the user can enter it in the appropriate fields. Now you need to try connecting to the Internet by clicking on the “Connect” button.
This way, wired Internet will be configured on your computer. As for other operating systems, the setup method is almost identical to these two, the difference may only be in some of the names of certain tabs, but choosing the one you need is intuitively simple and not difficult.
2 665Internet is integral part life of a modern PC user. For some, it is a means of communication and a way of entertainment, while others, using the global network, earn their living. In this article we will talk about how to connect your computer to the Internet in different ways.
There are several ways to connect to the global network, it all depends on your capabilities and (or) needs.
- Cable connection. This is the most common and simplest option. Provider in in this case provides the subscriber with a line - a cable laid into the room, which is connected to a PC or router. There are three types of such connections - regular, PPPoE and VPN.
- Wireless. Here, access to the network is carried out via a Wi-Fi router, to which the same provider cable is connected. Wireless methods also include mobile 3G/4G Internet.
- We will separately discuss the possibility of using mobile phone as a modem or access point.
Method 1: Ethernet
This type of Internet service provision does not require special access requirements - login and password. In this case, the cable is directly connected to the LAN connector on a computer or router.
In most cases, with such a connection no additional actions are required, but there is one exception - when the provider provides the subscriber with a separate IP address and its own DNS server. This data must be entered in the network settings in Windows. The same thing will have to be done if there is a change in provider, that is, find out what IP was provided by the previous one and what the current provider provides.
- First, we need to get to the corresponding settings block. Right-click on the network icon in the notification area and go to "Network Control Center".
- Next we follow the link "Change adapter settings".
- Here we right-click on "Ethernet" and press the button "Properties".
- Now you need to configure the parameters of the TCP/IP protocol version 4. Select it in the list of components and go to properties.
- We check the IP and DNS data. If the provider provides a dynamic IP address, then all switches should be in the position "Automatically".
If additional parameters are received from him, then enter them in the appropriate fields and click OK. This completes the setup and you can use the network.
- Ethernet has one feature - the connection is always active. In order to be able to disable it manually and do it quickly (by default you will have to go to the network settings each time), let's create a shortcut on the desktop.
Now, if the Internet is connected, then when we launch the shortcut we will see a window "Status-Ethernet", where you can find some information and disconnect from the network. To reconnect, just launch the shortcut again and everything will happen automatically.
Method 2: PPPOE
PPPOE is a high-speed connection, the only difference from the previous one is the need to independently create a connection with a given login and password provided by the provider. However, there is one more feature: PPPOE can compress and encrypt data. As already mentioned, access to the network still occurs using a cable connected to a PC or router.
![](https://i2.wp.com/lumpics.ru/wp-content/uploads/2018/02/Perehod-k-Masteru-sozdaniya-novyih-podklyucheniy-v-Windows-10.png)
You can manage PPPOE in the same way as Ethernet - using a shortcut.
Method 3: VPN
VPN – virtual private network or simply a “tunnel” through which some providers distribute the Internet. This method is the most reliable from a security point of view. In this case, manual connection creation and access data are also required.
![](https://i0.wp.com/lumpics.ru/wp-content/uploads/2018/02/Perehod-k-nastroykam-parametrov-setevyih-podklyucheniy-v-Windows-10.png)
These were instructions for Windows 10; in Windows 7, everything happens a little differently.
![](https://i0.wp.com/lumpics.ru/wp-content/uploads/2018/02/Perehod-k-svoystvam-brauzera-dlya-sozdaniya-novogo-VPN-podklyucheniya-v-Windows-7.png)
Method 3: Wi-Fi
Connecting a computer to a Wi-Fi router is similar to a simple cable connection: everything happens as simply and quickly as possible. This only requires an adapter. In laptops it is already built into the system, but for PCs you will have to purchase a separate module. There are two types of such devices - internal, connected to PCI-E connectors on the motherboard, and external, for a USB port.
It is worth noting here that inexpensive adapters may have problems with drivers on different OSes, so before purchasing, carefully study the reviews about this device.
After installing the module and detecting it by the operating system, a new network connection will appear in the notification area, with the help of which we will receive the Internet, just click on it and click "Connect".
Of course, the appropriate Wi-Fi network must be configured on the router. You can read how to do this in the instructions included with the router. Setting up modern devices, in most cases, will not cause difficulties.
Wi-Fi networks, for all their advantages, can be very capricious. This is expressed in communication interruptions, lack of connection with devices and the Internet. There are different reasons - from driver problems to incorrect network settings.
Method 4: 3G/4G modem
All providers mobile internet provide users with modems equipped with built-in memory with stored information in it software– drivers and client application. This allows you to connect to the network without unnecessary movements. When connecting such a modem to the USB port of a computer, you need to install the program and run it. If autostart of external devices is disabled in the operating system and the installer does not start automatically, then you need to go to the folder "Computer", find the disk with the corresponding icon, open it and run the installer manually.
To access the Internet, just press a button "Connection" in a programme.
If you don’t want to constantly use the client application, you can use the automatically created connection.
If a new item does not appear in the list, you can create a connection manually.
![](https://i0.wp.com/lumpics.ru/wp-content/uploads/2018/02/Dobavlenie-novogo-podklyucheniya-k-internetu-v-Paneli-upravleniya-Windows-10.png)
Working with such a connection in Windows 10 occurs in exactly the same way as in the case of a VPN, that is, through the settings window.
In Windows 7, everything is again a little simpler. Open the list, click on the name, and then press the button "Connection".
Method 5: Mobile phone
If it is not possible to connect your PC to the Internet using the above methods, you can use your smartphone as a Wi-Fi access point or a regular USB modem. In the first case, a wireless adapter is required (see above), and in the second, a USB cable is required.
For normal operation of the access point, you need to make a number of settings in the phone menu or use a special program.
If the computer is not equipped with a wireless communication module, then the only option left is to use the phone as a regular modem.
![](https://i2.wp.com/lumpics.ru/wp-content/uploads/2018/02/Perehod-k-nastroyke-seti-v-Android.png)
Conclusion
As you can see, there are quite a few ways to access the global network from a computer and there is nothing complicated about it. It is enough to have one of the tools described above available, and also if you need a few simple steps.
As you know, a computer without access to world wide web is not of particular interest. Almost everyone needs the Internet, but not everyone knows how to set it up. The procedure for connecting a laptop to the Internet is practically no different from a similar operation on a desktop PC. There are only a few methods that will be discussed in detail.
Connecting a laptop to wired Internet
Wired Internet has long become a common pleasure that many people have. This connection has both pros and cons. The access speed will be relatively high, but the laptop cannot be carried far with you, since the wire limits the distance. All settings are usually performed by wizards upon connection. You will also need to configure everything again after reinstalling the OS. To do this you will need to follow a couple of steps.1. In the control panel, go to the “Network and Internet” tab.
2. Select “Manage networks...”.
3. Click the “Set up a new connection...” button.
4. Select “New connection”, then click on the 2nd option.
5. Now you will need to enter the information provided by the provider (login, password). Here you can set a name and attempt to connect. If everything is configured correctly, then the Internet should appear on the laptop.
Connecting a laptop to Wi-fi
The most convenient method. If you have a configured Wi-Fi router at home, you can connect your laptop to the Internet in just a couple of minutes.Procedure:
1. Activate the wireless module on the laptop.
2. Open the “Network Connections” tab in the control panel.
3. Now you need to find a wireless connection and activate it through the menu (the “Enable” item).
4. All that remains is to select a specific point from the list and try to connect with it.
If you previously set an access password, you need to enter it. If the network is open, then you do not need to enter anything. However, you should definitely set up a combination to secure the connection so that no one can connect to it.
Connecting to the Internet using a modem
After purchasing a modem, the first thing you need to do is connect it to a free USB port. Usually all components are installed automatically. Once the software installation is complete, you can begin the setup process.1. Go to the control panel, find “Network Center...”.
2. You need to “Set up a new connection”, then click on “Internet Connection”.
3. A list of three options will appear, you need to click “Dial-up”.
4. Now you need to enter the information that was provided by your service provider and complete the setup process.
Setting up a connection on a laptop is very simple, but you must first decide on the connection method. Very convenient to use Wi-Fi router, since you can connect not only a computer, but also a smartphone.
- Abstract: Elementary particles
- Presentation on the topic "management"
- History of the development of computer technology presentation for a lesson on the topic Historical development of computer technology presentation
- Astronomy Presentations Interesting Topics for Astronomy Presentations
- Presentation on history "counting years in history"
- Astronomy Presentations Astronomy Presentation Template
- The anniversary of the expulsion of the Karachais recalled the problem of rehabilitation of repressed peoples
- Udmurt people What peoples live on the territory of Udmurtia
- Russia is a multinational state We live in a multinational country
- The smallest peoples of the world Which group of peoples is the smallest
- How to change a cash receipt order in 1c
- Day of Remembrance of Fallen Russian Internal Affairs Officers Heroism of Police Officers
- Northern coast of Neva Bay
- Enviable beauties in politics (17 photos)
- The best ballet performances
- Biography, political activity
- The magical world of crystals
- How to salt milk mushrooms: a quick recipe
- Ten Surprisingly Profitable Illegal Trades
- Management project based on the example of an enterprise presentation