It is known that fur products look beautiful and luxurious and provide good warmth in the winter cold. Like any clothing, they lose their shine over time. appearance. If your favorite thing has faded or is simply boring, you can paint it at home without turning to specialists, thereby turning it into something new and unique.

How to dye arctic fox fur at home

Arctic fox fur lends itself well to dyeing. If you want to upgrade your Arctic fox item, you will need:

• hair dye;
• fatty cream (can be replaced with glycerin);
• hair balm;
• rubber medical gloves;
• a brush or an old toothbrush for applying the coloring composition;
• vinegar.

1. Lubricate the inside with cream.
2. Stretch the material on a flat surface and secure it.
3. Thoroughly moisten the previously cleaned surface with water.
4. Wear gloves and quickly apply the coloring compound, smoothing the pile with your hand.
5. Wait for the period of time specified in the dye instructions.
6. Rinse the lint under running warm water and rinse in a vinegar solution.
7. Treat the item with balm diluted in water and rinse.
8. Lubricate the inside again with cream, gently stretch it, pin it with pins, and let it dry.

The mink coat looks great and is durable. If the color of the product has faded, you can dye the mink fur. Before you dye mink fur at home, prepare:

• hair dye;
• spray;
• a comb with fine teeth;
• shampoo;
• hair balm;
• fatty cream (glycerin is possible).

1. Clean the item from grease and dirt.
2. Treat the flesh with cream.
3. Prepare the coloring composition according to the instructions.
4. Lightly moisten the surface with water using a spray bottle.
5. Apply the dye to the pile with a spray bottle from a distance of 50 cm.
6. Even out the tone by combing the surface with a comb.
7. Wait half an hour.
8. Rinse off the coloring composition with warm water and shampoo.
9. Rinse with balm diluted in water.
10. Apply the cream to the flesh.
11. Lay out the product and leave it to dry.
12. Comb the fibers in the desired direction.

Before you dye your fur at home, you need to clean it. Paint particles have difficulty penetrating greasy, contaminated pile. Before dyeing a fur coat or other fur item, you should clean the product with an alkaline solution. To do this you will need:

• water – 1 l;
• salt – 2 tsp;
• ammonia – 1 tsp;
• detergent (dishwashing gel, washing powder) – 1 tsp;
• baking soda – 2 tsp.

1. Dissolve the ingredients in water, stir well until smooth.
2. Treat the flesh with a rich cream (possibly glycerin) to prevent drying out.
3. Apply the resulting solution evenly to the pile using a brush.
4. Rinse thoroughly under running water.
5. Lay the item out and let it dry at room temperature.

Coloring fur with hair dye

The structure of natural fur pile resembles human hair. Therefore, hair dye is suitable for home dyeing. This drug can be purchased at any supermarket, store household chemicals. The choice of colors and shades is varied, and it will not be difficult for you to find the right tone. It is better to choose shades darker than the original color, for example, black. To give something a light shade, you need to bleach it by treating it with a solution of hydrogen peroxide. Dyeing fur with this product is simple and reminiscent of the procedure for coloring your own curls.

Another product intended for dyeing at home is a special spray. This product is used to add tint to long ends. The undercoat and undercoat are not affected. The dye dissipates at a distance of 60-70 cm. The can should be moved slowly and measuredly to distribute the substance evenly. The painted area should be combed immediately to remove excess product and prevent the fibers from sticking together.

Video: is it possible to dye a mink coat?

We give a fur product a second life - learn how to dye fur at home

Happy owners of fur items know that they fade over time. To restore color, you don’t have to turn to professionals for help - you can do it at home. Knowing how to dye fur, you minimal costs give the product a second life.

Before proceeding directly to painting, the fur must be prepared. Clean it thoroughly from dust and dirt so that the paint adheres well. For these purposes, you can use an alkaline solution.

For a liter of water you need to take the following components:

• approximately 15 grams of salt;
• two teaspoons of baking soda;
• 7 ml detergent;
• 5 grams of ammonia.

Mix all ingredients to obtain a homogeneous mass. It is convenient to apply it with a brush. Be sure to wash off the product. You can also use another composition: combine water, vinegar, and alcohol in equal proportions.

The wrong side, the inner side, also needs to be processed. It is necessary to apply glycerin or fatty cream to it.

This will prevent skin deformation. The fur must be pinned to a board so that the item does not lose its shape during the process of dyeing and drying.

If the interior is poorly painted, it will “shine”, creating the effect of sparse fibers. It can be tinted from the inside out. How to paint the inside of the fur? Can be used special remedy or apply hair dye after testing it on an inconspicuous area.

Using hair dye

It is often used to color arctic foxes. It is quite dense, so it is better to buy two or three packages so that the color is rich and uniform.

Before applying the composition to the entire surface, test it on a small piece.

You can see how he “behaves” when interacting with chemicals. Choose a paint one or two shades darker than the natural color - it will make its color richer.

If a thing has turned yellow, it is better not to paint it, but to lighten it. This can be done using hydrogen peroxide. Only after this is it necessary to apply the coloring composition of the appropriate shade.

Owners of stylish things often think about how to dye natural fur at home. This must be done with quick, even movements. Leave the paint on for the time indicated on the package.

After applying the paint, it must be rubbed over the surface so that there are no bright spots left. This must be done carefully, without twisting the fibers; before doing this, you should wear gloves.

After the period indicated on the package has expired, rinse in warm water and vinegar. To make it soft and shiny, after drying, you can apply the balm that comes with the paint.

Rinse it thoroughly and dry the fur. After such manipulations, the item will look like new.

Spray paint

Owners of items made from arctic fox fur sometimes notice that the tips begin to turn yellow. To restore the original appearance, it is not necessary to paint the entire product; it is enough to use suede paint from an aerosol can.

Select the desired color and spray at a distance of at least 70 cm from the product. To prevent the hairs from sticking together, the can must be constantly moved, and after spraying, immediately comb them with a special brush.

If you want to dye your Arctic fox fur a different color at home, you will need regular hair dye. To get the desired result, you need to follow the instructions. But it is worth remembering that the color will last no more than 8-9 months, and then it will gradually begin to wash off. To restore the original appearance, the item will have to be painted again.

Is it possible to dye mink products?

Real fur is always in fashion. But over time, stylish mink items lose their saturated color and shine. How to dye fur at home? There is nothing difficult about this if you follow the basic rules.

Often women dye their mink with regular hair dye. Before applying the composition, mink fur must be prepared in the same way as arctic fox fur. To make the procedure easier, you can use an aerosol or spray bottle. Spray the product at a distance of approximately 70 cm. Do not forget to comb the hairs with a brush or at least rub them with your hands. To dry, you can use a hairdryer or let it dry. naturally. Hair balm applied to the surface will give shine and softness. Be sure to rinse it off thoroughly.

Products made from it are very popular due to their attractive appearance and reasonable cost. But with time artificial fur needs painting.

If you want to radically change the color of the product, choose hair dye with a high degree of durability. To refresh the shade, a tinting shampoo is suitable.

Pre-clean the product from dust and dirt with a swab soaked in shampoo. Apply the coloring composition to a small area to evaluate the result.

In order for the entire surface to be painted well, the product must be well stretched and fixed. Run the brush in the direction of the grain, grabbing the fabric as well. Follow the dyeing time specified in the instructions and rinse the fur thoroughly. Brush the wet bristles with a brush and let the product dry.

If you know how to dye real or faux fur, your items will always look fresh and neat.

The best ways to dye fur at home

Have you ever thought about how to dye fur at home? But surely every modern fashionista has a vest, sheepskin coat or fur coat made of natural or faux fur in her wardrobe. During use, the fur can change its original appearance, fade in the sun, and perhaps you will come up with the idea of ​​​​changing the appearance of the old thing. Today, service organizations, represented in sufficient numbers, provide a full range of fur dyeing services, but, unfortunately, with an impressive cost, they do not always meet customer expectations. That is why the question of how to dye fur at home, whether it is even possible to carry out this procedure yourself, is very common today. We will talk about it within the framework of this material.

Preparatory activities

The success of the “operation” largely depends on how well the preparatory measures are carried out. When you decide to update the shade of your fur or radically change it, do not forget to clean it, because dirt prevents deep penetration of the dye and, accordingly, affects the result of dyeing.

To clean, you will need an alkaline solution made from a liter of water, 2 teaspoons of soda, 1 teaspoon of any dishwashing detergent and 1 teaspoon of ammonia, which can be purchased at your nearest pharmacy. All components must be thoroughly mixed together until a homogeneous mass is obtained. To prevent drying out, apply a rich cream, such as baby cream, to the inner layer (the bottom layer of the skin). Then, armed with a brush with stiff bristles, apply an alkaline solution to the fur, spreading it over the entire surface, then rinse the product thoroughly under running water and lay it in a horizontal position to dry.

If you don’t know how to dye fur at home or what products to use, you’ve come to exactly the right place. Today, specialized stores offer quite a few professional dyes and compositions, but hair dye is still no less effective and affordable. You can find it in any supermarket at affordable price, and the variety of shades allows you to satisfy the taste preferences of every fashionista.

So, for dyeing you will need paint, a brush with which you will apply the composition to the fur and, of course, rubber gloves - an indispensable means of protection. When choosing a brush, give preference to one with stiff bristles.

How to dye arctic fox fur at home? Luxurious vests made from arctic fox skins have been a trend for the last few years. They will be relevant in the near future, which is why owners of such luxury need to properly care for it: update the shade of the fur every season, clean it. In addition, modern dyes allow, if necessary, to radically change the color of a fur product. So why not take advantage of this opportunity?

If you do not know how to dye natural fur at home, in particular, arctic fox fur, it is important to become familiar with some of the nuances of the procedure. They are primarily associated with the structural features of the fur. Of course, the choice of shade lies on the shoulders of the owner of the fur product, but professionals strongly recommend dyeing arctic fox fur in dark shades. If, on the contrary, you want to lighten the product, you will have to pre-treat the fur with hydrogen peroxide.

To get maximum results, wet the arctic fox fur with water, then begin applying the coloring composition, paying attention to each area. After the entire composition has been applied, it is necessary to maintain the time indicated on the packaging. After this, it is enough to rinse the product under running water and dry it, placing it in a natural horizontal position.

Mink hair is identical in structure to human hair, which is why the choice of dye for mink should be more demanding. The same hair dye is perfect, but it is better to give preference to the professional series, which will give the most natural shade possible, and will last much longer than budget analogues. But some people recommend using spray paints. IN in this case The paint must be applied from a distance of 60-70 cm in several layers. Don’t be afraid to layer the paint - this technology will allow you to achieve an expressive and deep noble shade.

If you are looking for an answer to the question of how to dye mink fur at home, use general rules, working with any fur. In all respects, the dyeing procedure completely repeats the procedure for transforming arctic fox fur described above.

This one was once the most popular look fur is still relevant today. Its popularity is largely due to the warmth and comfort that a product made from mouton fur gives. But not everyone knows how to properly care for fur, which is why, over time, there is a need for additional coloring.

Mouton products are rightfully one of the most unpretentious, but when it comes to coloring, you should be patient, be extremely careful and careful. How to dye fur at home with paint in the case of a mouton. The pile of such fur is quite thick and dense, which is why it is so important to evenly distribute the coloring composition over the entire surface.

And one more thing: before dyeing, test a small amount of pigment on a small area of ​​the fur product - if stains and bald spots appear, it is better to abandon the idea of ​​dyeing yourself and entrust it to professionals.

Do you think only natural fur evokes admiration and admiring glances from others? For several years, faux fur products: bright, sometimes extravagant and quite affordable models, have been revolutionizing the entire idea of ​​fashion, beauty and luxury. If you have a jacket or bag made from this material in your wardrobe, update it with dyeing. Want to know how to dye faux fur at home? We'll tell you about it.

The same hair dye is suitable for coloring - in the case of faux fur, you can experiment and give preference to brighter, acidic shades. For preliminary preparation An ordinary soap solution is suitable, which is applied with a sponge over the entire surface of the product.

In order to get an ideal result, before painting, do not just lay the product in a horizontal position, but also stretch it well. This will help avoid the formation of bald spots.

We tried to figure out how to dye fur at home, and listed several of the most effective ways. With the proper approach to the procedure, using high-quality materials and tools, you can achieve amazing results. In addition, dyeing fur, both natural and artificial, at home will not take you much time and, most importantly, money. We hope that you will appreciate the information presented and be sure to take advantage of our tips and recommendations.

Products made from natural fur will never go out of fashion. And all because they are not only warm and comfortable, but also expensive and stylish. A real fur coat or vest made of arctic fox fur is an indicator of wealth and high taste. But what to do if the fur has deteriorated from age and has become faded or dull. Or you accidentally stained a product, but you can’t get rid of the stain. In this case, you just need to re-dye the fur and breathe into the clothes new life. And indeed, the painted Arctic fox looks new, as if you treated yourself to another expensive purchase.

Cleaning the fur before painting

In order for the paint to apply evenly, completely color the fur and not leave pale areas, the product must be cleaned. To do this, prepare a solution from the following ingredients:

• 2 tablespoons salt;
• a tablespoon of ammonia;
• 2 tablespoons of baking soda;
• a tablespoon of powder;
• 2 liters of warm (not hot) water.

Mix all the ingredients and carefully apply the resulting mixture to the fur. Brush over the fur item. Make sure that not only the top, but also the bottom of the fur is cleaned. After this, wipe the fur several times with a clean, damp cloth to remove the soapy mixture from it. Skin with reverse side called mezdra. If possible, it should not be wetted, otherwise it may shrink.

Dry the fur naturally - no hair dryer or heater. Do not leave fur items in direct sunlight. It is better to hang the fur coat or collar on a hanger and leave it in a well-ventilated place.

As you know, fur can be dyed in special workshops. But the price of such a service is quite high, and besides, you will get an unexpected result. If you dye arctic fox fur at home, you can independently control the process and, if necessary, influence it. So, how to transform a fur product?

1. First you need to choose a paint. You can find special paint for fur in hardware stores. It is designed for a similar wool structure and fits perfectly onto the fibers. If you can’t find such a dye, you can use ordinary hair dye. Here you see a wide palette - from black to reddish-chestnut. It is important to take into account that you need to dye fur in more dark colors(relative to the native shade). Keep in mind that over time, tan fur will turn rusty or red, and black fur will take on a dirty brown hue.
2. Dilute the paint according to the instructions. To do this, carefully observe all proportions and water temperature. Wear gloves and a respirator - inhaling paint fumes is quite harmful.
3. Lubricate the flesh with fatty baby cream, glycerin or Vaseline. This will protect the skin from drying out and also prevent it from getting too wet.
4. You can dye a fur coat both dry and wet. Therefore, painting usually follows cleaning the product - wet lint helps the paint apply more softly. Take an ordinary brush that hairdressers use to color strands and apply paint to the fur. This must be done quickly, but carefully. Paint over all areas so that there are no light patches left.
5. To give the fur a special color, you can paint the product with several colors using a stencil. To do this, take a thick piece of cardboard and cut small asymmetrical holes on it. Apply the resulting stencil to the fur and paint the fur in certain areas brown. The next step is to paint the center of the brown spots black. This will give you a bright leopard print color.
6. The fur can be dyed not completely, but only its ends. This way you will get a rich and saturated shade. Most often, the ends of the villi are made lighter.
7. A great way to freshen up the product is to paint the ends of the bristles with a special paint for suede, which is sold in aerosol form. Keep the can at a sufficiently large distance and move evenly. This is much easier and faster than classic fur dyeing.
8. After this, leave the fur for the time indicated on the paint package. Usually 30 minutes is enough to get the desired shade.
9. Rinse the fur item thoroughly so that no paint remains on it.
10. Dilute five tablespoons of vinegar in a couple of liters of cool water. Rinse the product in this solution. Vinegar will help maintain softness and shine, and also lock in the color. After this, blot the fur with a dry towel.
11. To prevent the arctic fox from shrinking when drying, the inside needs to be stretched. To do this, use clothespins to hook the edges of the product and stretch it on the table. This way you will prevent deformation.

You need to dry the fur in a ventilated area, possibly on the balcony. Under no circumstances should you dry your Arctic fox in the sun, near a radiator, or with a hair dryer. Brush the fur periodically to prevent it from drying out randomly.

How to dye arctic fox fur a light shade

Dilute the lightening paint according to the instructions. If you are using hydrogen peroxide, dilute it with water in a ratio of 1:3. Apply the prepared product to the fur and leave for 10-15 minutes. It is not recommended to keep the bleaching composition on for a long time, otherwise the villi may become brittle. In this case, you risk being left without fur at all. After this, rinse the fur and leave to dry. Fur can be dyed after bleaching only after the product has completely dried. You should not lighten or dye your fur several times. Once will be enough, otherwise you can irreversibly damage the structure of the villi.

Don’t rush to give up your tired or damaged fur item. Ingenuity, imagination and a competent approach will allow you to update your winter products. Shine and change without cheating on yourself!

Video: how to dye fur at home

Fur, like human hair, tends to fade in the sun: fur collars and hats, after a certain amount of wear, lose their brightness of color or acquire a copper tint. To restore the former brightness of colors to your favorite collar, you don’t have to turn to specialists; you can get by with your own efforts.

How to dye fur at home?

Of course, many are interested in how to dye natural fur, for example, mink or arctic fox. Fur is similar in structure to human hair, so the procedure for coloring it will be very similar to coloring hair at home.

To dye fur you will need:

• dye. It's better to choose quality expensive paint, it will last longer and will not stain the fur;
• salt – 2-3 teaspoons, ammonia – 1 teaspoon, detergent – ​​1 teaspoon, baking soda – 1 teaspoon, 1 liter of water. The solution obtained by mixing these ingredients is used to clean fur before dyeing. Before you dye the fur of an arctic fox, mink, or any other fur, you should clean it of grease and dirt, otherwise the paint will not stick and all your efforts will be in vain;
• fatty cream (or glycerin) - it is used to treat the inside (the skin on the back of the product) in order to avoid it from drying out;
• vinegar - will be needed for rinsing fur after dyeing.

Staining procedure:

1. Washing fur. The above alkaline solution is applied with a brush, then rinsed and dried naturally. Fur may shrink after washing, so it is better to stretch it out wooden board and secure with pins (or nails).
2. Direct staining carried out quickly, on pre-moistened pile. The paint lasts as long as indicated on the box.
3. After coloring The fur is kept in warm water with vinegar and dried without using a hair dryer. To prevent the product from shrinking, it is also attached to the board with the fur facing up. The fur takes the longest to dry, so do not rush to remove the product from drying if it seems that the fur is already dry.

Many people are interested in how to dye mink fur. white on one's own. Unfortunately, dyeing with blonde paints can lead to the appearance of unwanted shades, which will be very difficult to get rid of. That's why I changed color white fur coat Or it’s better to take the collar to the dry cleaner, where it will be restored to its original appearance.

During prolonged wear, a fur product may lose its attractiveness only because the fur has faded either from the sun or from exposure to precipitation. In this case, there are two ways of restoration. Specialized enterprises that provide dry cleaning and painting services know how to do this efficiently. But you can give a “second life” to your favorite thing at home. By following the instructions and applying some of your own imagination, you will be able to create a unique work of art.

If the age of a fur product is indicated by its color, then you can update the appearance by painting.

For gray astrakhan, only black or brown is used. Mink is dyed in its native colors in order to restore faded shades. Black or brown pigment is suitable for mouton products. Fur items in beige tones are dyed in all shades of brown to enhance the intensity of the native color. Choose a paint one or two shades darker for the job.

The main condition for high-quality and uniform coloring is. An alkaline solution has proven to be the best cleaning agent; its composition is as follows:

• soda (dessert spoon);
• salt (dessert spoon);
• ammonia (teaspoon);
• about 15 drops of detergent
• 1 liter of water.

Lightening yellowed white fur is additional element color restoration. To do this, use a solution with hydrogen peroxide (a teaspoon) and ammonia (10 drops). This product can remove yellowness from the fur of a silver fox. When processing with this composition, deep soaking should be avoided. First, make a test on an inconspicuous area of ​​the product. 15 minutes is enough for lightening. We must remember that a longer process will make the ends brittle.

Chalk and starch help remove yellowness from the fur of a gray rabbit for a while. The powder is rubbed evenly and with little effort over the top of the pile and shaken off. This method will not harm the product, so it can be used often. Gray rabbit fur is dyed with hair pigment. There is also an absolutely safe method, in which you carefully apply it to the entire surface of the product with a brush. water solution blues. The composition should be light blue.

To enhance faded raccoon fur, use hair dye with a lightening effect, as a result of which the product will look gold-plated or silver-plated.

You can renew fox fur with thick potassium permanganate. Treat it carefully with a sponge, not allowing things to get wet.

The faded ends of the fur are painted with suede spray paint. Spray the product slowly, keeping a distance of about 70 centimeters between the fur coat and the sprayer.

How to dye fur with hair dye?

Hair dyes are suitable for dyeing an arctic fox or a mink on your own. This method has been tested in practice and always gives positive results when painting not too old things. It is better to first test the effect of even high-quality products on a small, inconspicuous area of ​​the product.

To dye fur at home, you will need to follow these steps:

1. Straightening the strands of natural fur, apply a thin layer of fatty cream or glycerin to the flesh.
2. Gently moisturize the entire fur surface.
3. Apply the product as carefully as when coloring your hair.
4. Leave it for a while. Duration of dyeing - according to the instructions on the packaging with the dye.
5. To enhance the effect of the paint, apply a saline solution evenly over the entire surface.
6. Wash off the paint under the flow of water from the shower.
7. Remove excess with rags or blotting paper.

After drying, the fur is combed, observing the natural direction of the pile. This dye lasts on a fur item for up to six months, and this is often enough to make the item look renewed.

A simplified option for saturating the tone is to color it with a tinting shampoo (according to the instructions on the package).

Homemade stencils are used for painting with multi-colored paints. The spots are painted one at a time.

Faux fur is easier to dye. You can use tinting shampoo and hair dye. The sequence of actions is as follows:

1. Before dyeing begins, the product is fixed.
2. Apply the product in the direction of the fibers.
3. Leave the paint to soak in. The time must match the instructions in the instructions.
4. After the procedure, the fur is washed, dried and combed.

Experts do not recommend experimenting with coloring new things.

Home or professional dyeing extends the life of a fur product for a short time. After some time, the pigment comes off and the item becomes faded again.

Almost every woman has a fur item in her wardrobe. During prolonged wear, natural fur loses its attractiveness and becomes faded. Some fashionistas dream of changing the color, making it more fashionable and bright. It is quite possible to dye fur at home, the main thing is to adhere to the basic rules given below.

Preparing for coloring

Before you begin the dyeing process, you need to clean the item. This will allow you to paint the product evenly without leaving pale areas on it. Have a good time this procedure A solution prepared from the following ingredients will allow:

• salt (2 tbsp);
• ammonia (1 tbsp);
• baking soda (2 tablespoons);
• washing powder (1 tbsp);
• warm water in the amount of two liters.

The components are thoroughly mixed, then the mixture is applied to the fur with a brush, evenly distributing it over the entire surface. For effective cleaning, use a damp cloth or clean cloth to rinse the soap solution several times. In order for the core (skin) on the back side of the product not to shrink, it must be moist, so it should be wetted.

Interesting! You can clean the item with regular shampoo intended for hair or dishwashing detergent.

Some use aggressive substances: kerosene or lighter refill. With this method, you must always remember that their use can significantly worsen the appearance of the products.

Dry fur collar or a fur coat on hangers in natural conditions, away from heating devices and sun rays outdoors or in a room with good ventilation.

Types of fur

Before you paint this or that thing at home, you need to understand the characteristics of the material. Only in this case can you achieve the desired result and get the desired color or shade. The easiest items to dye are those made from rabbit, mink, and chinchilla. But the procedure should be carried out carefully, since these materials, especially rabbit fur, are highly sensitive to chemicals.

Important! Dying thick fur will require a lot of paint and time. But the result will please the owner of the wardrobe item with a good color that will last for quite a long time.

If the fur coat is made from beaver, you should not even try to lighten it, as it will acquire a yellow tint. The muskrat can behave very unpredictably, since not everyone may like the pinkish shades with whitish areas. After some time, the paint will fade and the product will take on a completely different appearance.

Arctic fox coloring

You can paint the arctic fox product in specialized workshops. The cost of such a service is quite high, and not every person can afford to pay a certain amount. There is a way out - you can perform the procedure at home yourself. To do this you need to do the following:

1. Choose the right paint. It is sold in hardware stores. If you can’t find a suitable color, there is another option - dyeing the fur at home with hair dye. Similar dyes are sold in a wide range of colors: black, red, golden, brown, red and other shades; choosing them will not be a problem.
2. Strictly following the instructions, dilute the dye.
3. Put a mask or respirator on your face and gloves on your hands.
4. It is recommended to treat the flesh with Vaseline, baby cream or glycerin. This will prevent the skin from getting too wet and protect it from drying out.
5. Dyeing can be done on both wet and dry arctic fox fur. In the first case, the paint lays on the surface quite softly. Apply the substance quickly using a hairdressing brush. This should be done carefully so that there are no unpainted areas left.
6. If you want to get a leopard color, use a stencil and several colored paints. Holes of different diameters are cut out of thick cardboard, applied to the surface of the product and painted with black and brown paints.
7. The Arctic fox can get a beautiful, rich shade if only the ends of the pile are painted. Typically, light-colored coloring compounds are used for this.
8. You can refresh a fur wardrobe item with a spray, painting only the ends. You need to purchase paint intended for suede, which comes in an aerosol. Holding the can at a great distance, you need to make uniform movements. This is a simple and fast way.

After completing the procedure, the arctic fox fur is left for several minutes to obtain the desired shade. The time is indicated on the package. Now you should treat the product by preparing the following solution: dilute 5 tbsp in 2 liters of water. spoons of vinegar. As soon as it is ready, immerse the item in it.

Vinegar perfectly fixes color, gives fur additional shine and softness, to a large extent improving the appearance of a fox fur coat or collar. To prevent the item from becoming deformed, the mesh is stretched on the table, secured with clothespins.

To give the Arctic fox a lighter tone, use a hair lightener, which is diluted in accordance with the instructions. You can use hydrogen peroxide, diluting it with water in a ratio of 1 to 3. The prepared product is applied to the product and left for no more than 15-20 minutes, otherwise the villi will become brittle. After the time has passed, the fur is rinsed and sent to dry.

Dyeing a mink coat

Faded mink fur spoils the appearance of a fur coat. In order to restore color and shine, a simple procedure is performed - painting a mink coat. It is necessary to purchase in advance the desired shade of paint, a spray bottle, a comb with thick teeth, rich cream or glycerin, shampoo and hair conditioner. Now you need to do the following steps:

• clean the item from dust, dirt, grease;
• treat the skin (inner space) with a greasy substance;
• prepare the coloring composition in accordance with the instructions;
• moisten the surface of the product;
• apply a dye to the pile using a spray bottle;
• comb hairs;
• wash off the paint with shampoo diluted with water;
• treat the surface with balm.

The procedure is completed, all that remains is to dry the product, after applying the cream to the inside and combing the hairs.

In the same way you can dye silver fox fur, products made from mouton and any other material. For the silver fox, they usually choose black or black paint. Brown. For a mouton fur coat, dark reddish shades and chestnut color are best suited.

Dyeing a fur collar

It is not always necessary to completely paint an item. In some cases, it is enough to dye a fur collar at home. This is quite easy to do using regular paint for hair. First, the collar is cleaned of dust and dirt, dried, and then the dyeing process begins:

1. Using the instructions, you need to dilute the paint.
2. For uniform coloring, the collar is slightly moistened with water.
3. The coloring composition is applied by hand (you should first put on gloves). The process should be done quickly, distributing the paint well throughout the pile.

After completing the procedure, the collar is washed well with water and rinsed in a vinegar solution or hair conditioner. It should be dried on a flat surface, stretched and pinned to the base with needles.

Artificial fur

Some people prefer to buy faux fur products. In many characteristics it is not inferior to natural raw materials and sometimes even surpasses them. It can also be colored using hair dye. First you need to select the tone of the dye, clean the product, removing dirt, dust, and grease from it, using a soap solution. After this, remove the remaining soap solution with a damp swab.

Treatment should be carried out one day before staining.

However, you should know that faux fur is dyed in dark colors. Should buy quality paint, which will prevent the item from being damaged.

The coloring composition is obtained by strictly following the instructions. After this, it is applied to the artificial fur with a brush, making movements in the direction of the pile, evenly distributing it. The brush should be pressed so that it touches the fabric base. The paint is left for the time recommended in the instructions, then the material is washed with water, and if necessary, excess paint is removed with cotton swabs. After this, the still damp fibers are combed with a sparse comb and the product is sent to dry.