Security service chevron. How to properly sew security guard chevrons

A summer suit consists of a jacket and trousers. It is part of the all-season basic uniform kit (VKBO). A suit made of Mirage fabric (PE-65%, cotton-35%), with a high cotton content, is hygienic and comfortable for daily wear. Straight-cut jacket. The collar is a stand-up collar, the volume is regulated by a patch on a textile fastener. The central fastener has a detachable zipper closed with a flap with textile fasteners. Two chest patch pockets with flaps and textile fasteners. Back with two vertical folds for freedom of movement in the shoulder blade area. Single-seam sleeves. At the top of the sleeves there are patch volume pockets with flaps with textile fasteners. In the elbow area there are reinforcement pads with an entrance for protectors with textile fasteners. At the bottom of the sleeve there is a patch pocket for pens. At the bottom of the sleeves there are cuffs with textile fasteners to adjust the volume. Straight cut trousers. The belt is solid with seven belt loops. The volume of the belt is adjusted with a cord with tips. Button closure. Two side welt pockets. Along the side seams there are two large patch pockets with three folds for volume. The upper part of the pockets is tightened with an elastic cord with a lock. The entrances to the pockets, designed obliquely to resemble the hand, are closed with flaps with textile fasteners. In the knee area there are reinforcement pads with an input for protectors with textile fasteners. At the bottom of the trousers there are patch pockets with flaps with textile fasteners. The volume at the bottom of the trousers is adjustable with tape. The back halves of the trousers have two welt pockets with flaps and a hidden button closure. Reinforcement pad in the seat area

Jacket: - loose fit; - central side fastener, wind flap, buttons; - yoke made of finishing fabric; -2 welt slanted pockets with a flap, with buttons at the bottom of the front; - 1 patch slanted pocket on the sleeves; - reinforcing shaped pads in the elbow area; - bottom of sleeves with elastic; - double hood, with a visor, has a drawstring for volume adjustment; - adjustment at the waist using drawstrings; Trousers: - loose fit; -2 side vertical pockets; - in the knee area, on the back halves of the trousers along the seat seam - reinforcing linings; -2 side patch pockets with flap; -2 rear patch pockets with buttons; - the cut of the parts in the knee area prevents them from stretching; - the back halves under the knee are assembled with an elastic band; - elastic waistband; - bottom with elastic; - fastened braces (suspenders); - belt loops; wearing - both in boots and outside. material: tent fabric; composition: 100% cotton; density: 270 gr.; Overlays: ripstop, oxford 600; cuffs: yes; rubber seals: yes; jacket/pants pockets: yes/yes; additionally: lightweight summer version; high strength of fabric and seams;

Semi-fitting dress in dark blue with a V-neck, decorated with a red silk scarf (included in the set). Fabric - gabardine. According to the order of the Ministry of Internal Affairs of Russia No. 575, chevrons are sewn onto the sleeves of the dress at a distance of 8 cm from the edge of the shoulder. A chevron is sewn onto the left sleeve indicating membership in the Ministry of Internal Affairs of Russia, and on the right sleeve there is a chevron designating the service of a police/justice officer. You can add Velcro to the chevrons. The scarf is worn with the dress in a triangle folded into a scarf, the narrow ends are tied together and tucked into the back under the collar. Wide side tucked inside under the neckline of the dress. It is allowed to wear a summer dress without a scarf in office premises. The length of the dress along the bottom edge should be at knee level. The Police/Justice dress with short sleeves is part of the new police uniform.

Please note - this model has fleece insulation only in the jacket! Color: khaki Jacket: - loose fit; - central side fastener, wind flap, buttons; - yoke made of finishing fabric; -2 welt slanted pockets with a flap, with buttons at the bottom of the front; - 1 patch slanted pocket on the sleeves; - reinforcing shaped pads in the elbow area; - bottom of sleeves with elastic; - double hood, with a visor, has a drawstring for volume adjustment; - adjustment at the waist using drawstrings; Trousers: - loose fit; -2 side vertical pockets; - in the knee area, on the back halves of the trousers along the seat seam - reinforcing linings; -2 side patch pockets with flap; -2 rear patch pockets with buttons; - the cut of the parts in the knee area prevents them from stretching; - the back halves under the knee are assembled with an elastic band; - elastic waistband; - bottom with elastic; - fastened braces (suspenders); - belt loops; wearing - both in boots and outside. material: tent fabric; composition: 100% cotton; density: 270 gr.; Overlays: ripstop, oxford 600; cuffs: yes; rubber seals: yes; seasonality: demi-season; additionally: reinforced inserts, removable fleece lining, dust covers on trousers, suspenders included

Fabric: Mirage-210, pe-67%, xl-33% The summer suit consists of a jacket and trousers. Straight-cut jacket. Stand collar. The central fastener has a detachable zipper closed with a flap with textile fasteners. Two chest patch pockets with flaps and textile fasteners. The pockets are located obliquely, along the direction of the hand. Back with two vertical folds for freedom of movement in the shoulder blade area. Single-seam sleeves. In the upper part of the sleeves there are patch volume pockets with flaps on textile fasteners, with belt loops with inside valves In the elbow area there are reinforcement pads with an entrance for protectors with textile fasteners. At the bottom of the sleeves there are patch pockets for pens. At the bottom of the sleeves there are cuffs with textile fasteners to adjust the volume. Straight cut trousers. The belt is solid with seven belt loops. The volume of the belt is adjusted with a cord with tips. Button closure. Two side welt pockets. Along the side seams there are two large patch pockets with three folds for volume. The upper part of the pockets is tightened with an elastic cord with a lock. The entrances to the pockets, designed obliquely to resemble the hand, are closed with flaps with textile fasteners. In the knee area there are reinforcement pads with an input for protectors with textile fasteners. At the bottom of the trousers there are patch pockets with flaps with textile fasteners. The volume at the bottom of the trousers is adjustable with tape. On the back halves of the trousers there are two welt pockets with flaps and a hidden fastener.

Consists of a jacket jacket View all products by tag jackets and trousers. Fabric - Rip-Stop, pe-67%, cotton-33%. Designed for employees of internal affairs bodies who have special ranks police on outdoor duty. Worn with a dark blue T-shirt and a cap View all products by tag dark blue cap. According to the order of the Ministry of Internal Affairs of Russia No. 575, chevrons are sewn onto the sleeves of the suit at a distance of 8 cm from the edge of the shoulder. A chevron is sewn onto the left sleeve indicating membership in the Ministry of Internal Affairs of Russia, and on the right sleeve a chevron indicating the service of a police officer is sewn. You can add Velcro to the chevrons. Above the left pocket (shelf), at a distance of 10mm, a badge is sewn. View all products by tag badge "POLICE" (110x30 mm), made in the shape of a rectangle with a red edging, the inscription is made in white or silver. A badge is sewn onto the back, 10 mm above the red line on the back. View all products by tag badge "POLICE" (275x85 mm), made in the shape of a rectangle with a red edging and a white or silver inscription. Employees with special police ranks, when serving in in public places wear badges badges View all products from the category Badges on summer suit jackets. The badges are attached with a pin to the left breast pocket. The badge is housed in a removable badge pocket that is worn on the right side chest jackets, summer suits, dark blue. The badge is a rectangular card containing the identification data of a police officer.

The jacket is part of the daily and weekend uniform of police officers of the new model. Worn with trousers. Material: Suit (wool blend) fabric. Composition: 75% wool, 25% polyester polyester (polyester) synthetic fiber based on polyester and fabric made from it. The material can be made either from polyester or with the addition of artificial and natural fibers... Learn about Polyester from the Encyclopedia 280 g/m2 Lining: Twill 100% viscose Viscose is the first artificial fabric that was produced by man. Viscose (translated from the Latin “viscosus” means “viscous”) is artificial fiber, which is obtained by... Find out about Viscose from the Encyclopedia 105% g/m2. Slim fit, single breasted, fastened with four buttons. Turn-down collar with lapels. Shelves with cut-off barrels. Horizontal welt side pockets in a “frame” with flaps. The back has a central seam, in the lower part of which there is a vent. Sleeves are set-in, two-seam. Jacket with lining. On the left shelf of the lining there is an internal pocket with a “leaf”. Designed for employees of internal affairs bodies with special police ranks, as well as for cadets (listeners) educational institutions higher professional education Ministry of Internal Affairs Ministry of Internal Affairs Police component single centralized system Ministry of Internal Affairs Russian Federation. Included in the internal affairs bodies. (Article 4 of the Regulations on the Ministry of Internal Affairs... View all products belonging to the department of the Ministry of Internal Affairs of Russia. It has a red edging on the sleeves. According to the order of the Ministry of Internal Affairs of Russia No. 575, chevrons chevrons View all products by tag chevrons are sewn onto the sleeves of the suit at a distance of 8 cm from the edge of the shoulder . A chevron is sewn onto the left sleeve indicating belonging to the Ministry of Internal Affairs of Russia, and onto the right sleeve a chevron is sewn indicating the service of a police officer. The chevrons can be supplemented with Velcro. In addition, this tunic has a tunic (from the German Kittel “blouse”), the upper part of everyday, dress and field uniform clothing made in a special cut and worn by people serving in the armed forces or serving in... Learn about the jacket from the Encyclopedia shoulder straps with buttons are sewn on, and two lapel emblems are also strengthened. How to sew shoulder straps? For this, in addition to the jacket itself and shoulder straps, you will need a ruler, scissors, a needle, a thimble and strong red thread. Be sure to put on a thimble, even if you are used to sewing without it, since sometimes the needle passes through the shoulder straps View all products by tag shoulder straps with great difficulty , and you may hurt your fingers. If you find it difficult to pull the needle and thread out of the shoulder strap, you can use pliers or tweezers. 1) First of all, prepare the shoulder straps, i.e. attach all the required insignia to it, since it will be much more difficult to do this on an already sewn shoulder strap. 2) Take the shoulder strap and position it so that the side farthest from the button is close to the seam that connects the shoulder of the jacket to the sleeve. At the same time, the upper edge of the shoulder strap, directed towards the back, should overlap the seam running along the shoulder by 1 cm. In other words, the shoulder strap should be slightly moved forward. 3) Thread a needle and fasten the shoulder strap to the jacket at three points: at the corners of the shoulder strap, at the place where it comes into contact with the sleeve seam and in the center of the semicircular cut. Now the shoulder strap will be securely fastened and will not move from the correct position during the sewing process. 4) Then very carefully sew the shoulder strap around the perimeter, making stitches in such a way that only barely visible points remain on its surface in those places where the needle enters the shoulder strap, and the thread between two adjacent holes passes mainly from the wrong side (along the lining) of the jacket . Then the thread will not be noticeable even if its color does not exactly match the color of the shoulder straps. In this case, the optimal length of each stitch should be about 1 cm. 5) With the second shoulder strap, follow the same pattern. How to strengthen lapel emblems? On the collar of the jacket - along the bisector (a line dividing the corner of the collar in half), at a distance of 25 mm from the corner of the collar to the center of the emblem, the vertical axis of symmetry of the emblem should be parallel to the flight of the collar. How to place awards on a police jacket? On the left side of the chest, awards are located in the following order: Insignia of special distinction are located so that the upper edge of the medal block is at the level of the ledge of the lapel of the tunic and jacket. When wearing two or more special insignia, they are arranged separately in one row, from right to left, with intervals of 10 mm between the lateral ends of the stars in the order listed. Special insignia of one designation are arranged in the order in which they were awarded. Badges of orders, orders and medals are arranged horizontally in a row from the center of the chest to the edge, from top to bottom in the order listed. When wearing two or more orders or medals, their blocks are connected in a row on a common bar. Orders and medals that do not fit in one row are transferred to the second and subsequent rows, located below the first, also placing them from the center of the chest to the edge in the above order. The blocks of orders and medals of the second row must go under the orders and medals of the first row, while the upper edge of the blocks of the bottom row is placed 35 mm below the blocks of the first row. Subsequent rows are arranged in a similar order. Badges of orders, orders and medals are located on a single-breasted police jacket so that the upper edge of the block of orders and medals of the first row is located 90 mm below the level of the lapel ledge. On the right side of the chest, awards are located in the following order: Orders are located from left to right in the order listed. The upper edge of the largest order of the first row is located at the level established for the common bar (block) of the first row of orders and medals placed on the left side of the chest. Orders that do not fit in one row are transferred to the second and subsequent rows located below the first, placing them also from the center of the chest to the edge in the indicated order. The centers of the orders in a row should be at the same level. The distance between orders and rows of orders is 10 mm. The sign of the number of wounds made of golden galun (for a severe wound) or dark red color (for a light wound) is located on the fabric strip of the top of the product. Braid width 6 mm, length 43 mm. The severe wound badge is placed below the light wound badge. The distance between stripes is 3 mm. The sign of the number of wounds is placed on the tunic and jacket to the right of the sign for honorary titles of the Russian Federation, and in its absence, in its place.

Material: gabardine gabardine (French gabardine) cotton, wool or silk fabric of diagonal or twill weave; it is thin, very dense, elastic, soft and has good rollability. As a result... Learn about Gabardine from the Encyclopedia -Classic trousers with piping along the side seam. -The volume of the belt is adjusted by the side sections with elastic band. -There are 6 belt loops on the belt. -Two side pockets. -One welt pocket with a flap on the back half of the trousers. - Along the side seam - red piping

LOW BOOTS Upper: genuine chrome leather (1.2-1.4 mm). Lining: non-woven, abrasion-resistant and quick-drying, high density (150g/m2) Sole: TPR (±40°C), 128. Method of fixing the sole: adhesive. Arch support: metal. Toe and heel: reinforced thermoplastic material. Sizes: 40-45. Black color. Weight: 420 gr. Technical characteristics of low shoes. Model Picnic 23801 Manufacturer BUTEX Country Belarus Upper material natural chrome leather (1.2-1.4 mm) Lining material hygroscopic and wear-resistant fabric (150 g/m2) Sole fastening adhesive Instep support metal Toe and heel reinforced from thermoplastic material Sole material TEP (±40°C ) 128 Available size range 40-45 Shoe color black

The lightweight EMERCOM suit is designed to provide comfortable service in hot weather. The EMERCOM suit consists of a short jacket and trousers with orange piping. The fabric of the suit does not fade, does not electrify, and retains its excellent appearance for many seasons. CHARACTERISTICS For hot weather Regular cut MATERIALS Gabardine (100% polye)

Material: Polyester 65%, cotton 35% Fabric is very resistant to fading Weave: Twill 2×1 Fabric weight: 245 g/m2 Fabric dyeing: Dispersive active, using Japanese technology, super durable WR - water-repellent finish

Jacket: loose fit; central fastener with loop and button; yoke, linings and pockets made of finishing fabric; 2 lower welt pockets with flap, loop and button; internal zip pocket with button; on the sleeves there is 1 patch slanted pocket with a flap for a loop and a button in the elbow area with reinforcing shaped overlays; bottom of sleeves with elastic; double hood, with a visor, has a drawstring for volume adjustment; waist adjustment with drawstring; Pants: loose fit; codpiece with loop and button fastening; 2 upper pockets in the side seams, in the knee area, on the back halves of the trousers in the seat area - reinforcing linings; 2 side patch pockets with flap; 2 rear patch pockets with buttons; the cut of the parts in the knee area prevents them from stretching; Dust-proof calico skirt at the bottom of the trousers; the back halves under the knee are gathered with an elastic band; elastic waistband; elastic bottom; Gender: male Season: summer Material: “Tent fabric” (100% cotton), sq. 270 g/m2, VO Lining material: Mixed rip-stop (65% polyester, 35% cotton), sq. 210 g/m2, VO Regulatory technical documentation: GOST 25295-2003 Men's and women's coat outerwear: suits, jackets, vests, incl. insulated, windbreakers (demises) Color: black Lowest temperature: 10 Fastening: buttons Country: Russia Size chart Men's size Bust circumference, cm Waist circumference, cm Hips circumference, cm 44/46 86-94 76-84 94-100 48/50 94-102 84-92 100-106 52/54 102-110 92-100 106-112 56/ 58 110-118 100-108 112-118 60/62 118-126 108-116 118-124 Male height Height Height of a typical figure, cm Growth interval of a typical figure, cm 1-2 158-164 155.0-166.9 3-4 170- 176 167.0-178.9 5-6 182-188 179.0-191.9 Women's size Bust circumference, cm Waist circumference, cm Hips circumference, cm 40/42 78-86 60-64 86-92 44/46 86-94 68-72 94-100 48/50 94-102 76-80 102-108 52/ 54 102-110 84-88 110-116 56/58 110-118 94-100 118-124 60/62 119-126 104-108 126-132 Female height Height Height of a typical figure, cm Growth interval of a typical figure, cm 1- 2 146-152 143.0-154.9 3-4 158-164 155.0-166.9 5-6 170-176 167.0-178.9 Terminology: Volume (from 0.8 to 4322.0 m³) Volume internal space tents.

Scout suit moss The scout suit is made in a very successful design of the demi-season “Smok” uniform in the colors of the experimental A-TACS FG camouflage. The suit consists of a jacket and trousers. The jacket is long, below the waist. It is equipped with a deep hood with adjustable drawstrings, has four voluminous cargo pockets, closed with flaps on a large English button, which makes it easy to open the pocket in a hurry, with hands in shooting gloves, and in other extreme conditions, when the count of time has gone to seconds. The elbows of the suit are reinforced with an additional layer of fabric, the sleeves are equipped with wide rubber bands. The front zipper is duplicated along the entire length with smaller English buttons, which are fastened into a secret one. The trousers of the suit are loose-fitting, all loaded parts are reinforced with an additional layer of fabric. The belt has a wide rubber-fabric tape sewn into it, a thin cord for additional tightening, and loops for attaching suspenders. The trousers have four pockets. Two slotted ones, covered with flaps on a large English button, two overhead cargo ones, in which additional ammunition can be carried. At the bottom of the legs there is a wide cuff and so-called “brakes” made of elastic fabric that prevent the legs from riding up. color moss (A-TACS FG) Main features: color drawstring at the waist elastic bands on the pants carrying case suspenders included CHARACTERISTICS CHARACTERISTICS OF THE SUIT Material: T/S Composition: 65 PE /35 viscose Density: 160 g. Cuffs: yes Sealing elastic bands: no Jacket/pants pockets: yes/yes Seasonality: all-season Additional: carrying case

Combined arms OV windbreaker. The general-arms windbreaker is part of the new uniform set of the Russian VKBO Armed Forces, and is intended for use throughout the year. It is made of taslan, a material consisting of 100% polyester, with a density of 180 g. per 1m2, which provides increased wear resistance of the product and protection from precipitation. The jacket has a deep hood with adjustable ties, two patch pockets on the sleeves, two voluminous side welt pockets and sealing elastic bands along the edges of the sleeves and waistband. False shoulder straps ensure a quick change of insignia from field to clearly visible everyday ones and vice versa. To quickly identify a serviceman, there are five areas with a textile fastener. Two breastplates for the name, blood type rank and other necessary information, and three on the sleeves of the windbreaker to place the emblems of the branch of service, the tactical emblem of the unit and the nationality of the military. The removable fleece lining allows you to comfortably use the windbreaker in low temperatures. color green number Main features: windbreaker statutory removable fleece lining hood CHARACTERISTICS SUIT CHARACTERISTICS Material: taslan Composition: 100% p-e Density: 180 gr. Cuffs: yes Sealing elastic bands: yes Jacket/pants pockets: jacket Seasonality: demi-season Additionally: removable fleece lining

Lightweight UIS trousers provide comfort when working in hot weather. The "Gabardine" material does not wrinkle, does not lose shape when washed, and does not fade. Perfect option for daily wear. CHARACTERISTICS Regular cut MATERIALS Gabardine (100% polye)

Worsted wool blend fabric, certified and passed multiple tests, will make your stay at work comfortable and presentable. CHARACTERISTICS Regular cut MATERIALS Wool blend

Fabric - wool mixture. Designed for employees of internal affairs bodies with special police ranks. According to the order of the Ministry of Internal Affairs of Russia No. 575, chevrons are sewn onto the sleeves of the suit at a distance of 8 cm from the edge of the shoulder. A chevron is sewn onto the left sleeve indicating membership in the Ministry of Internal Affairs of Russia, and on the right sleeve a chevron indicating the service of a police officer is sewn. You can add Velcro to the chevrons. The jacket is short, straight cut. Central closure with detachable zipper. Turn-down collar. Shelves with detachable yokes in the shoulder girdle area. On the shelves there are chest welt pockets with figured flaps with buttons. Two side welt pockets in a frame with a zippered entrance. Back with stitched yoke. There are soft folds along the yoke line for freedom of movement. The sleeves are set-in, single-seam, with stitched cuffs fastened with buttons. At the bottom of the jacket See all products by jacket tag - a one-piece belt, the volume of which is adjustable at the side sections with an elastic band. The back and shelf are lined with knitted fabric (mesh). The armholes are edged with edging braid. Straight-cut trousers. Stitched belt with six belt loops. The volume of the belt is regulated by side sections with elastic band. Two pockets in the side seams. One welt pocket with flap and internal button closure is located on the right rear half of the trousers. Red piping is inserted along the side seams of the trousers. It is part of the new police uniform.

A modernized version of the trousers from the American Army ACU field uniform. Modernization concerns both changes in the cut of the latest generation of the original American uniform, as well as our own developments. Some general minor issues with the Splava ACU suit (missing stitching, position of pockets, size matching, etc.) have also been corrected. Attention! The ACU-M suit replaces the ACU from the Alloy, and is no longer a replica of the original American kit ACU, because has a number of subtle design changes. New wide belt loops for trouser belt for convenience and reliability. The height of the belt loops has been increased for a wider belt (up to 60 mm). The belt is tightened with a cord, the cord comes out of the sewn loops on the inside of the belt in front. The cord can be removed if necessary. The belt is fastened with a button. The fly has buttons. One-piece design, as in the original, unlike the old Alloy version. The bottom of the trousers is tightened with a sewn-in thin braid. All Velcro is sewn for reliability not only along the perimeter, but also along the diagonals (in the original - a simple seam around the perimeter). The loaded sides are stitched in two or three passes. The main seams are closed (locked) with a chain stitch, a lot of zigzag fastenings in loaded places. Pockets: side mortise pockets and back pockets with buttons are made in a new way - sections of fabric along the edges of the pockets are hidden under the seam. instead of overlock in the original, which increases strength and reduces chafing of the skin; large-volume side cargo pockets. With folds to give a flat shape when empty, with the entrance tightened with an elastic cord on the lock. They are fastened with buttons instead of Velcro, like the latest generation of the original ACU kit. There are three buttons, two standard, and one additional at the back, it is needed to fasten the flap when the entrance is pulled tightly, because the standard button is shifted to the center of the pocket relative to the response loop on the valve, and the third outermost button appears opposite the loop. The flap height has been increased and the side cargo pockets have added internal organization in the form of simple flat pockets made from the main fabric for small items. There are three narrow pockets on the right leg, and two wide calf pockets on the left leg, fastened with Velcro. Well suited for carrying IPPs, easy access while seated on the bottom of all external pockets, stitched loop for water drainage Reinforcements: The knee reinforcements have been specially adapted for use with D3O knee pad inserts or anatomical polyethylene foam inserts (not included!). To achieve this, the height of the reinforcements has been slightly increased and the shape of the two seams used to center the protective inserts has been changed. The reliability of holding the knee pads inside the pads has been significantly increased due to the use of wider Velcro for fastening and a special hidden pocket into which the lower edge of the knee pad rests. The pocket prevents the edge of the knee pad sliding down from “tearing” the Velcro (see. photo in the catalogue) the crotch is reinforced to protect against tearing, as on the original ACU trousers of the latest sample - extra fabric has been added in the seam and two new bartacks; the seat area has been reinforced with a rounded overlay Material: NYCO Rip-stop, 50% cotton, 50% nylon SIZE SELECTION : Download

OMON winter boots, in which high (24 cm) boots are made of genuine chrome leather 1.6 mm thick, with a flexible thermoplastic sole, equipped with a large relief tread and insulation made of high-quality printed wool fur containing (70%) sheepskin - this is exactly those shoes that are necessary for law enforcement officers, professional tourists and everyone who is interested in outdoor activities. The toe box and heel of the boot are reinforced with thermoplastic material to maintain shape. This model uses a lacing system, in the upper part of which there are two pairs of metal loops, allowing you to quickly remove and put on the boots without removing the laces from the loops. The blind valve prevents dirt, snow, sand and other foreign objects from getting inside the boot. This model is a godsend for people with high arches. For greater comfort, in this model the toe and heel of the sole are raised, which makes walking more comfortable. Upper: genuine chrome leather (1.4-1.6 mm) Lining: printed woolen fur Sole fastening method: glue-stitched Instep support: metal Toe and heel: reinforced from thermoplastic material Sole: TEP (±40°C) 2050 Size: 36-50 Color: black . Weight: 840 g Blind valve protects the foot from impact environment(dust, water, dirt). Hooks. Soft edging. Technical characteristics Army-type boots (Army boots). Model Omon 907 Manufacturer BUTEX Country Belarus Upper material natural chrome leather (1.4-1.6 mm) Lining material printed wool fur (merino) Sole fastening with adhesive stitching Arch support metal Toe and heel reinforced from thermoplastic material Sole material TEP (±40°C), 2050 Available size range 36-50 Shoe color black Valve type blind valve Soft edging present Hooks present

Uniform skirt for employees of internal affairs bodies. Summer version made of lightweight gabardine fabric. Is a part casual uniform employees of internal affairs bodies. According to order No. 575, the length of the skirt along the bottom edge should be at knee level.

The size is indicated by the collar. Without Velcro under the chevrons. You can use shoulder straps Worn untucked The belt is adjustable in size using side elastic bands 2 pockets on the chest Material: 65% Polyester Polyester (polyester) is a synthetic fiber based on polyester and fabric made from it. The material can be made either from polyester alone or with the addition of artificial and natural fibers... Learn about Polyester from the Encyclopedia 35% Viscose

The police shirt is made of polyester-viscose fabric. Thanks to this fabric, the shirt will last longer and will not lose its original appearance even after numerous washes, it will not become electrified. CHARACTERISTICS For hot weather Regular cut MATERIALS 65% polye, 35% viscose

A modernized version of the jacket from the American Army ACU field uniform. Modernization concerns both changes in the cut of the latest generation of the original American uniform, as well as our own developments. Some general minor issues with the Splava ACU suit (missing stitching, position of pockets, size matching, etc.) have also been corrected. Attention! The ACU-M suit replaces the Alloy ACU, and is no longer a replica of the original American ACU kit, as... has a number of subtle design changes Worn tucked in or untucked The body is fitted. In the area of ​​the shoulder blades there are folds to increase freedom of movement of the arms. Reinforcement of the elbows with fabric pads with the possibility of installing protective foam inserts under them (not included!), the entrance is fastened with narrow Velcro. The square Velcro in the center of the chest has been removed as unnecessary for placing insignia. Central fastener. on a tractor plastic two-way zipper with comfortable braid grips. A Velcro strip is fastened over the zipper. As with the original ACU kit, the number and size of these Velcro strips have been reduced for ease of operation and less chafing. The relative position of the return Velcro has been changed to protect the clothes under the jacket from damage (in the original, when the jacket is unbuttoned, the Velcro-hook looks towards the body) The stand-up collar (protects the neck from rubbing with a bulletproof vest), is fastened with Velcro. Can be worn turned down Velcro under name tapes on the chest Cuffs with Velcro patches For reliability, most Velcro are sewn not only around the perimeter, but additionally along the diagonals or with a seam in the middle. The loaded sides of all Velcro are stitched in two or three passes. In the original, most of the Velcro are sewn in only one pass around the perimeter. The main seams are closed (locked) with a chain stitch, many zigzag fastenings in loaded places. Pockets: pockets on the shoulders, fastened with Velcro. There is Velcro on the outside of the flap for a standard flag chevron. The IR marker fastening elements have been removed from the valve as unnecessary. Large Velcro for attaching chevrons. At the bottom there is a sewn loop for water drainage and a set of two plugs for large Velcro sleeve pockets - return Velcro, lined with the main fabric of the suit. The plug covers a single-color Velcro of a large area, which stands out against the background of the fabric, especially in the camouflage design, on the left forearm there is a flat, non-closing pocket for three handles; the kit includes removable shoulder straps, false shoulder straps and buttons for fastening them. Flat, slanted chest pockets are sewn on independently and fastened with narrow Velcro. To protect hands and gloves from scratches, a Velcro-hook is used on the pocket, and a Velcro-loop is used on the flap (in the original ACU jacket it’s the other way around). The dimensions and angle of the pockets have been changed and correspond to the latest generation of the original American ACU kit Material: NYCO Rip-stop, 50% cotton, 50% nylon SIZE SELECTION: Download

“GUARD” LOW BOOTS Upper: genuine chrome leather (1.4-1.6 mm). Lining: non-woven, abrasion-resistant and quick-drying, high density (150g/m2). Sole: TEP (±40°C), 2121. Sole fastening method: adhesive stitching. Arch support: metal. Toe and heel: reinforced thermoplastic material. Sizes: 36-50. Black color. Weight: 575 gr. Technical characteristics of low shoes. Model Security 703 Manufacturer BUTEX Country Belarus Upper material natural chrome leather (1.4-1.6 mm) Lining material hygroscopic and wear-resistant fabric (150 g/m2) Sole fastening with adhesive stitching Instep support metal Toe and heel reinforced from thermoplastic material Sole material TEP (±40°C ) 2121 Available sizes 36-50 Shoe color black

The MPA-12 tactical shirt is designed to be worn with body armor in hot weather. The combination of nylon and cotton provides maximum comfort, eliminating wrinkles, and unlimited freedom of movement. HOT WEATHER CHARACTERISTICS FOR INTENSE TRAFFIC MATERIALS NYLON 65% P/E, 35% COTTON

Combined arms suit of a new type. The new general-arms suit is made taking into account the latest requirements for uniforms and can be used virtually all year round. Structurally, the suit consists of a light jacket (tunic) and loose-fitting trousers. It is made from a durable 70/30 polyester/cotton blend with a weight of 220 g. per 1m2 of the statutory color “digital flora”. The jacket is equipped with a zipper, which, in turn, is covered with a windproof flap, securely fixed with textile fasteners, has a stand-up collar that prevents the fighter's neck from rubbing against the body armor, and five pockets. Two front ones, two patches on the sleeves and one internal, waterproof, for documents. The sleeves of the jacket are reinforced with a double layer of fabric and are securely fixed at the wrist with Velcro fasteners. The cut of the jacket itself is designed so that insulating layers can be slipped under it and worn either tucked into trousers or untucked. For quick identification in emergency, and the insignia required by the regulations on the jacket, there are six reliable attachment points - three above the chest pockets, and three on the sleeves. The suit's trousers are loose enough so as not to restrict the fighter's movements, the knees and other loaded parts are reinforced with a second layer of fabric, and elastic bands are sewn into the belt for automatic volume control. This allows you to wear the insulating layer quite comfortably and, in critical cases, do without a waist belt. To accommodate the minimum required by a fighter, the trousers have six pockets. Two cargo labels on the sides, two slotted ones, and two rear ones. At the bottom of the legs there are drawstrings that allow you to securely fix the trousers over combat boots, as well as belt loops, they allow for more precise height adjustment and make wearing trousers tucked into shoes more comfortable. color pixel Main features: color green pixel durable material collar stand Velcro for stripes internal pocket CHARACTERISTICS CHARACTERISTICS OF THE SUIT Material: rip-stop Composition: 70/30 Density: 220 gr. Cuffs: Velcro Sealing elastic bands: ties Jacket/pants pockets: yes/yes Seasonality: demi-season

Material: wool mixture - Classic trousers with piping on the side seam. -There are 6 belt loops on the belt. -Two side pockets. -One welt pocket with a flap on the back half of the trousers. - Along the side seam - red piping

The upper is made of genuine chrome leather, 1.4 -1.6 mm thick. The lining is made of textile material Cambrelle®, “Super Royal”®, high density, dries quickly and does not wear off. Durable sole is made of thermoplastic, can withstand temperatures from −40 ° C to +40 °C The toe and heel are reinforced with thermoplastic material TECNO G The model is secured with lacing and is durable in use Made and manufactured in Belarus General characteristics ISBN: 5-458-45233-X 978-5-458-45233-5 Publisher: ЁЁ Media Series: - Technical characteristics Army-type boots (Army boots). Model Omon 701 Manufacturer BUTEX Country Belarus Upper material natural chrome leather (1.4-1.6 mm) Lining material hygroscopic and wear-resistant fabric (150 g/m2) Sole fastening with adhesive stitching Arch support metal Toe and heel reinforced from thermoplastic material Sole material TEP (±40°C ) 2121 Available size range 36-50 Shoe color black Valve type blind valve Soft edging present Hooks present

Unique in its characteristics summer suit DPS: does not wrinkle, does not fade, does not electrify, has excellent breathability, does not require special care. The suit is sold complete with two traffic police uniform trousers. CHARACTERISTICS For hot weather Regular cut MATERIALS Gabardine (100% polye)

The windbreaker is designed to ensure comfortable work in rainy and windy weather. A ventilation hole under the yoke and a mesh lining support air exchange and optimal body temperature balance. There are reflective strips and inserts. FEATURES Rain and wind protection Regular fit MATERIALS Twill (100% polye)

The suit consists of a jacket and trousers. Has removable type A batting insulation. Type A suit jacket is lined, with a central internal side fastener with six buttons, the top loop G is through. The front and back of the jacket are lined with windproof lining. Removable insulation is attached to the jacket along the sides, collar, bottom of the sleeves with loops and buttons, and additionally along the sides with textile fasteners. The jacket is fastened at the waist and bottom with a cord. The trousers have a stitched waistband with a fastener of 4-5 buttons. There are slits at the bottom of the side seams. Low insulation tightens the ties. The removable trouser insulation is attached to the waistband with loops and buttons.

The Soft Shell suit is purposefully designed to meet the stringent requirements of Special Forces operators. Designed to maintain a comfortable body temperature for the user during the cold season during vigorous activity, in bad weather, in wind and rain. The suit can be used as the base 5th layer of ECWCS Gen.III. Jacket MPA-26-01: -2 internal and 6 external pockets with access when worn together with tactical equipment; - ventilation openings are protected by mesh; - adjustable waist and hem; - stand collar; - adjustable, detachable hood; - closable ventilation holes; - taped zippers. - places for chevrons with Velcro. Soft shell fabric breathes, does not tear, does not get wet, and does not restrict movement!

Molded toe part with rubber sole Height of boots 12 cm. Insole made of cotton fabric + polyurethane Gender: men's Season: summer Main color: olive Camouflage color: green number Upper part material: Fabric Lining part material: cotton fabric Bottom part material: rubber Sole fastening method: hot vulcanization Shoe type: sneakers Color: kmf Fastener: lacing Country: Russia Size chart cm 22.5 23 23.5 24.5 25 25.5 26.5 27 27.5 28.5 29 29.5 30.5 31 Russian size (RUS) 35 36 37 38 39 40 41 42 43 44 45 46 47 48 EUR 36 37 38 39 40 41 42 43 44 45 46 47 48 49 UK 3.5 4 5 6 6.5 7.5 8 9 9.5 10.5 11.5 12 13 13.5 Determining your size Determine your size using following diagram: Place your foot on Blank sheet paper Mark the extreme boundaries of the foot. Measure the distance between the furthest points of your foot. Find the appropriate size in the table above.

Distinctive feature The Gorka anorak suit produced by the PRIVAL trademark is a special style of jacket. The difference between an Anorak jacket and jackets of a regular style is that it does not have a slit in the front and is worn over the head. The jacket has a large kangaroo pocket and a button pocket. These jackets are popular among climbers and outdoor enthusiasts. The suit is made of thick cotton tent fabric. Cotton-blend raincoat fabric is used as finishing and reinforcement for areas critical to wear and getting wet. The jacket and trousers are loose-fitting, allowing you to add additional layers of clothing. For better fit, fit and to avoid “windage” in the wind, the suit has a system of ties on the sides of the jacket, on the sleeves, under the knees and at the bottom of the trousers. The trousers have 4 pockets. The pocket flaps are triangular in shape, which significantly reduces bending of the extreme corners of the flap and clinging to ammunition and equipment. The trousers are equipped with comfortable suspenders. The combination of overlays with the main khaki fabric ensures that the silhouette of a person is broken up at distant distances. The suit is designed to protect against temperature changes and strong wind in mountainous conditions. Fabric: tent 100% cotton, inserts - cotton blend fabric

Jacket, with a detachable hood, shortened, with a central fastener with a detachable zipper, on a stitched knitted belt, stand-up collar, set-in sleeves. The shelves have lower patch pockets fastened with a zipper. Shelves and back with stitched yoke. The sleeves are three-seam, with a stitched knitted cuff. On the middle part of the left sleeve there is a double patch pocket fastened with a zipper. Stand collar. Lower collar in fleece with main fabric facing. The left shelf of the lining has a patch pocket fastened with a contact tape. Gender: male Season: demi-season Main color: black Material: 100% polyester Upper fabric material: Jordan fabric 100% polyester, Insulation material: Synthetic winterizer 1 layer 120 g/m2 Lining material: 100% polyester Regulatory technical documentation: GOST 25295 -2003 Men's and women's outerwear of the coat range: suits, jackets, vests, incl. insulated, windbreakers (demise) Color: black Low temperature: -10 Fastening: zipper Country: Russia Size chart Men's size Bust circumference, cm Waist circumference, cm Hip circumference, cm 44/46 86-94 76-84 94-100 48/50 94-102 84-92 100-106 52/54 102-110 92-100 106-112 56/58 110-118 100-108 112-118 60/62 118-126 108-116 118-124 Male height Height Height of a typical figure, cm Growth interval of a typical figure, cm 1-2 158-164 155.0-166.9 3-4 170-176 167.0-178.9 5-6 182-188 179.0-191.9 Women's size Bust circumference, cm Waist circumference, cm Circumference hips, cm 40/42 78-86 60-64 86-92 44/46 86-94 68-72 94-100 48/50 94-102 76-80 102-108 52/54 102-110 84-88 110- 116 56/58 110-118 94-100 118-124 60/62 119-126 104-108 126-132 Women's heights Height Height of a typical figure, cm Growth interval of a typical figure, cm 1-2 146-152 143.0-154.9 3- 4 158-164 155.0-166.9 5-6 170-176 167.0-178.9

Police windbreaker. This statutory police windbreaker thanks to the use of high quality membrane tissue density 240 g. will be able to protect employees of the Ministry of Internal Affairs from any adverse weather conditions. A big feature of this jacket model is its resistance to wind gusts and moisture resistance. Inside the stand-up collar there is a hood, which can be easily adjusted along the front. Elasticated cuffs, an adjustable waistband, and a durable zipper hidden by a fabric strip with rivets will also provide protection from bad weather. Along the perimeter of the shoulder girdle, the product is complemented by sewn-in red piping. On the shoulder seams there are shoulder straps on the button, intended for attaching distinctive signs. color dark blue main features: MIA shape material membrane wide Size chart CHARACTERISTICS CHARACTERISTICS OF THE SUIT Material: membrane Composition: P/E Density: 240 gr. Cuffs: yes Jacket/pants pockets: yes/no Seasonality: all-season Additional: statutory police windbreaker

Lightweight and durable tactical gloves Reinforcements on the palm for additional protection Thanks to high-density polyurethane foam inserts, they effectively protect the bones of the first phalanx and the back of the hand Belt with Velcro fastener to secure the wrist Material: Genuine leather Tactical gloves are an absolute thing necessary for people dealing with bladed or small arms. They protect hands from pinching mechanisms of small arms, cuts and bruises. Tactical knives are most often designed to fit tactical gloves. Thanks to the open fingers, the hands do not lose sensitivity and can perform the most delicate manipulations. Following the military, tourists and extreme athletes fell in love with tactical gloves. Drivers of SUVs, motorcycles, ATVs and bicycles, tourists, regulars of adventure racing and orienteering received their face light And reliable protection for your hands, allowing you to abandon unnecessary caution and focus on the route. Half gloves "Storm" are made of genuine leather. The palm has soft inserts to protect the hand and provide better shock absorption. The back of the hand and the knuckles of the first phalanx of the fingers are reliably protected by high-density polyurethane inserts.

Gender: unisex Season: summer Upper part material: vamp / heel / boots - genuine leather Lining part material: breathable membrane material Bottom part material: two-layer insole on a foam basis, moisture-wicking Sole fastening method: injection molded Regulatory technical documentation: TR CU 019/2011 "About the security of funds personal protection" Protective properties: without protective toe cap Type of footwear: boots Series: STIX Sole: PU

Fabric: Jacket membrane Composition of the raw material of the outer fabric: 1 layer: 92% polyester, 8% spandex with water-dirt-repellent Teflon impregnation. 2nd layer: membrane 10000WRP/5000MVP. 3rd layer: 100% nylon mesh. Insulation: "Fibersoft" 150 g/m2. Color: Rock Python Description: The suit consists of a jacket and trousers, with an outer water-repellent layer of fabric on a membrane, with Fibersoft insulation. Jacket: -long-brimmed, with a non-removable hood, a removable insulating jacket. -Central clasp with detachable two-lock zipper; -hood: non-removable with visor, adjustable along the face; -front and upper side pockets with a vertical entrance, with a zipper; -the lining is a removable jacket made of another layer of Fibersoft insulation. Trousers: -non-removable insulating lining, with a wide insulated belt and a shoulder unloading system made of elastic tape; - front halves of trousers with welt pockets and ventilation holes with zippers; -in the knee area there are reinforcement pads; -bottom of the side seams “zipper”; - inside the bottom of the trousers there are wristbands with knitted cuffs.

There are several ways to quickly and easily attach insignia to a security guard's uniform and everyday clothing. Firstly, you can use Velcro. This is perhaps one of the most practical ways. If you have a patch that you don’t want to part with, then you can sew the bottom part of Velcro onto several sets of clothes and, if necessary, for example, remove the patch from one jacket and stick it on another. Secondly, you can use a special film as a fastener, which must be applied to the patch and clothing and ironed with a hot iron. The chevron will stick in a matter of seconds. The third method is the most reliable - sewing. You can learn how to sew security guard chevrons, as well as other insignia, from this article or watch photos and training videos on the Internet.

In order to sew on security guard chevrons you will need pins or chalk, a needle and thread, scissors and a ruler. Use a ruler to measure the distance for the chevron. Trace the sign attached to the form with chalk. Instead of chalk, you can use dried soap. If you don’t have soap or chalk at hand, then pins will do. Pin the top edge of the patch, then place the sign in a strictly vertical position and pin the bottom edge. Now everything is ready and you can start sewing. Using double thread to match the uniform or edging, if there is one on the patch, carefully sew on the insignia.

Make small and neat stitches. You can also sew with a hidden seam. If you are sewing an insignia to a pocket, be especially careful not to accidentally sew it closed. Embroidering chevrons directly on the uniform will be reliable and durable, and will look neat on the uniform. But for embroidery you should contact a special company. After all, not everyone will be able to independently embroider the desired sign by repeating it exactly.

How to properly sew UFSIN chevrons

The placement of insignia on the FSIN uniform is strictly regulated by special regulatory documents. Therefore, before you try to sew on the Federal Penitentiary Service chevrons yourself, you should find out where and how to do it correctly. Each patch must be placed in a specific place in accordance with the order. An employee of the Federal Penitentiary Service cannot attach insignia in any order. As a result of improper fastening in best case scenario The employee will be reprimanded. The chevrons of the Armed Forces of the Russian Federation, the Federal Penitentiary Service, the Police, the Ministry of Internal Affairs, as well as all other insignia of all known services and units are attached to the uniform based on three well-known technologies.

You can attach UFSIN chevrons using thread, Velcro and thermal film. If the order does not provide for a specific type of fastening of a particular chevron, then you can choose it yourself. The most reliable method is to sew with double strong thread, and the fastest is to use thermal film.

How to properly sew chevrons onto the Ministry of Emergency Situations uniform

Today, EMERCOM chevrons are purchased not only by employees of the relevant structure, but also by ordinary citizens. For example, the Ministry of Emergency Situations chevrons have become extremely popular among airsoft and paintball players. In order to make the game process as realistic as possible, players sew patches of the Ministry of Emergency Situations, Ministry of Internal Affairs, Airborne Forces, etc. onto their uniforms. If you don’t know how to sew chevrons onto the Ministry of Emergency Situations uniform, then don’t worry, it’s not at all difficult, as it might seem at first glance. The principle of sewing on stripes is the same for all insignia. It is enough to choose the desired color of thread, prepare scissors, a needle, chalk or dry soap, and a ruler. If you have sewn something at least once in your life, then you are unlikely to have any difficulties sewing on a chevron.

Today you can buy custom baseball caps with a logo or baseball caps with the image of the sign and inscription of the Ministry of Emergency Situations. This way you can make your boring everyday look unusual, unique and interesting. With the help of modern equipment and technology, you can create the most incredible shapes, sizes and colors of stripes.

Private security companies appeared in the USSR during the era of perestroika, but were officially enshrined in legislation in 1992. The activities of private security companies are regulated Law on private detective and security activities in the Russian Federation dated March 11, 1992.

Security guard patches are very diverse. Below we will tell you about them and explain how to sew them correctly. We also do machine embroidery and will make you patches according to your design!

Chevron Private Security Company Alfa-Nabat

Chevron ChOO Flagman

Security chevrons

A necessary thing in every private security company is security emblems. They are required when organizing, they increase the rating of the ORR. You can't go anywhere without them!

Various symbols are used to create such emblems. They often use State symbols Russian Federation: coat of arms, flag. Chevron elements are sometimes used Russian Army. these can be emblems of military branches, recognizable symbols. Ancient heraldry is often used: lions and bears proudly grin from the emblem of the ChOO, symbolizing the courage and bravery of their bearers.

"Security" patch

In addition to various emblems, inscriptions are also used. The Security patch is the most popular of them. It is often embroidered with reflective threads, or threads that glow in the dark. This allows the guard to demonstrate his status even at night or in a dark room.

Large “Security” patch on the back- also a common attribute of a security guard. This patch is sewn onto a jacket or uniform.

Currently, each security organization chooses its own uniform, but this is not the case everywhere. For example, in Novosibirsk a common uniform has been introduced for all private security companies, which can only be distinguished by their chevron.

This form of private security company is modeled after others public services: Ministry of Internal Affairs, Russian Railways and others.

On the back of the jacket there is a large “Security” patch made of yellow reflective material. On the left side of the chest there is a small “Security” badge. On the right side of the chest there is a badge with the name of the guard. On the left shoulder there is a chevron with the coat of arms of the Russian Federation and the inscription “Security”. On the right sleeve there is a CHOP chevron.

If your private security company does not have special rules When wearing a uniform, it is better to follow the above instructions.

Many people are tormented by the question of how to sew on a security guard's chevron.

There are no such strict rules as in the army. Each private security company has its own charter, where you should look for information on how to properly sew on security guard chevrons. However, we can give some general recommendations.

CHOP chevrons usually come in three types: chest and sleeve patches. on the back. The easiest one to distinguish is the one on the back: it is the largest. Chest and sleeve chevrons are often the same, but sometimes only the emblem is attached to the sleeve, and the surname or the inscription “Security” is attached to the chest.

So. Sew the back patch in the center of the back if it is an emblem, and if it is an inscription, closer to the top. Sew the chest patch above the pocket. The sleeve patch is sewn either over the pocket, if there is one, or so that there is 8 cm from the top of the patch to the shoulder seam.

If the location of the chevrons on a security guard’s uniform is not specified in your regulations, then you should sew them on exactly this way.

The sleeve chevron is usually attached to the left sleeve, and the blood type patch is on the left pocket.

How to sew a chevron: layout diagram

Security emblems on hats

Not every private security uniform includes hats, but sometimes it is necessary to apply the emblem there too. Most often, caps are used, sometimes hats, even baseball caps.

In such cases, the emblem of the private security company or the inscription “Security” is located on the front of the product in the center. You can sew on a patch, or you can embroider it on the product itself.

Any emblem will become a patch, you just need to convert the image into stitch format. It is called drawing the layout. IN special program our designer will prescribe the settings for each stitch. This is complex work, on which the result directly depends, so the layout is paid separately and once and costs 500-2000 rubles. When you order 500 copies or more, we make it for you free of charge!

You personally approve the layout, and then we embroider a trial copy on our material. Only after the sample is approved is the entire edition embroidered. The price for application depends on the number of stitches. To make it easier for you to navigate, we have compiled a table of the approximate cost of embroidery depending on its size.