Dimensional grid for gloves. How to choose the size of women's gloves, focusing on the material of the product. Determine the size of the gloves.

Before you know how to determine the size of gloves, it is necessary not only to take measurements, but also to establish what kind of work they are intended for.

Construction and design requirements state that gloves should provide the greatest degree of protection in the intended conditions of their end use.

In this regard, GOST and international standard clearly governed by various physical and mechanical indicators.

Glove requirements

Among the main indicators, according to which gloves are regulated, should be highlighted:

• Composition and thickness the material from which this hand protection is made;
• Permeability acids, alkalis and other hazardous substances;
• Strength when stretched;
• Resistance tearing, etc.

Convenient design is undoubtedly a prerequisite for safety. Accordingly, for various types of work, different sizes, and special attention is paid to the shortest possible glove length.

The manufacturer is obliged to indicate "Suitable for special use" if the length of the gloves is less than the minimum specified in the standard.

Determine the size of men's and women's gloves

Before determining the size of the gloves, you must measure the circumference of the palm with a centimeter tape without using the thumb and convert centimeters to inches.

When taking this measurement, it is necessary to slightly bend four fingers, as if holding the measuring tape. In order to find out how to determine the size of men's gloves, you do not need to do complex calculations, it is enough to use the table.

Sizes of gloves for men: table

From the following table, you can see how to determine size of women's gloves.

Based on the data obtained and taking into account the desired length, the size of the gloves can also be set.

How to determine the size of gloves: table

Brush length* - calculated as the distance between the wrist and the tip of the middle finger.

There is a standard EN420, according to which, gloves are classified by purpose and method of manufacture.

Requirements for basic dimensions, depending on the type of gloves (not less):

1 - the total length of the glove, 2 - the width at the level of the bend of the napkin, 3 - the length of the napkin of the thumb.

In fact, manufacturers produce gloves in length 310-330 mm... Supplement if necessary elongated arm, then the length reaches 380 mm... Such gloves are in demand when work with bulk chemicals and solutions of acids and alkalis.

How to determine the size of rubber gloves

In this case, gloves are divided into two types, depending on their purpose:

• Type I- for rough work, thickness S is 0.6-0.9 mm.
• Type II- for delicate work, thickness 0.2-0.4 mm.

Standard length of gloves L must be at least 300 mm.

Glove sizes shown in the table are set GOST 20010-93 and refer to rubber technical gloves.

In production disposable rubber gloves the following data is used.

There is one more indicator that allows you to choose the most comfortable size of gloves - degree of freedom of movement... Indeed, it is often required to perform precise manipulations, while the movements of the fingers should not be constrained.

During the experiment it is necessary to lift the rod from a flat surface three times within 30 seconds... Only big and forefinger hands.

All these data are relevant if the indicators of control of norms and quality obtained during the experiments are observed.

Types of size nets for gloves. How to determine the size of gloves yourself.

Tell

When planning to buy gloves for themselves, many people go to the store without thinking about their size. By trying on several pairs, the buyer can choose the most suitable product. However, knowing your size will come in handy in many cases - for example, when shopping online from online stores. In such cases, there is simply no opportunity to try on gloves before ordering this product. Thus, learning to understand the existing marking will be very useful in order, if necessary, to compare it with your own parameters and choose the most suitable product.

The scope of the gloves is quite extensive - they can be used for various needs. Different kinds rubber gloves are used in medical, food, chemical, construction and other fields of activity. They act as necessary funds safety, effectively protecting the skin of the hands from external influences.

In addition, traditionally warm gloves made of various materials put on with the onset of cold weather to protect the hands from freezing and chapping. It is difficult to imagine winter in our latitudes without such a necessary and very useful accessory. The materials for the manufacture of gloves can be soft leather or leatherette, suede and knitwear.

Currently, similar products for every taste and wallet are on sale:

• leather gloves have not gone out of fashion for decades. Such products are distinguished by their strength and durability, while they can be combined with clothes in different styles... Leather is easy to distinguish from a substitute - you just need to put your hand on the material. Genuine leather is quickly heated by body heat, leatherette stays cool to the touch;
• natural suede gloves are quite warm and comfortable to wear, however, if not properly cared for, they can lose their appearance... They should not be dried near heating devices; drying at room temperature is optimal for suede gloves;
• bright knitwear and knitted products - differ in a completely democratic cost and evoke associations with childhood. Such gloves look most harmonious in an ensemble with a hat and a scarf of a similar style;
• for the evening or wedding dress pick up satin, as well as openwork gloves. Such items can be decorated with handmade embroidery and ribbons.

For everyday wear, gloves should be chosen in such a way that when worn on hands, they cause a feeling of maximum comfort and coziness. Information on how to determine the size of gloves can be found in this article.

When choosing the right size for this product, it is worth considering the following:

• if you want the gloves not only to warm, but also act as an element of your style, you need to choose a product of a suitable design that fits well on your hand;
• the glove should not be too tight around the hand like a second skin. Gloves that are too tight can constrict and restrict the movement of the hands, as well as squeeze the palms, acting as a cause of poor circulation. It is unlikely that anyone will like the discomfort of wearing such products;
• it is necessary to select gloves in such a way that they can be removed and put on without special efforts... At correct selection they do not restrict the movement of fingers and hands;
• if the gloves sit too loosely, they are unlikely to be able to fulfill their function of warming. In this case, the wind will blow under the cuffs, dust will clog, besides, gloves that are too spacious can rub the delicate skin of the hands;
• lined leather gloves should be a quarter size larger than normal gloves so that the fit is slightly incomplete. This measure will keep your hands warm even in severe frosts.

If there is such an opportunity, when buying gloves, you should, after carefully examining the product, evaluate the quality of the material and lining, as well as the accuracy of the seams.

Thus, gloves should never be chosen by eye. When choosing a suitable product, it is necessary to take into account that some materials (for example, lamb skin) tend to stretch - so if such gloves are a little tight, over time their size will increase slightly and they will subsequently fit properly.

How to determine the size of gloves: marking methods

If you want the gloves to fit well on your hand, you will need to make the necessary measurements before making a purchase. Simple calculations will help you find out which size of gloves will fit best. Product data standard sizes are marked according to the circumference of the hand in centimeters or inches.

At first glance, it may seem that to define right size gloves is quite difficult, because there are several options for their labeling. When choosing this accessory, it is necessary to take into account the following information - indeed, there are several types of dimensional nets. For example, European and Asian manufacturers use different size tables, because in accordance with physiological characteristics, on average, the hands of Chinese residents are smaller in comparison with the Slavs - thus, not carefully choosing the parameters of the labeling that is familiar to us, you can make a mistake with the size.

American glove manufacturers use a different table, which does not include size numbers, but letters from S to XL. This is quite convenient, since when choosing a product, you do not need to memorize numbers, it is enough to decide on a letter. The marking of gloves from American manufacturers can be deciphered as follows. For women with a hand girth of less than 16 cm, the size of gloves XS (extra small - very small) is suitable, with 16.5-19 cm - S (small). The size of 19-21.5 cm corresponds to the size of women's gloves M (medium - medium), 21.5-24 cm - L (large - large). Size XL (extralarge - very large) is suitable for a palm width of 24 - 27 cm.For men with a hand girth of up to 22 cm, size S is suitable, at 24 cm - M, 26 cm - L. The size of XL men's gloves should be chosen by owners of palms with with a girth of more than 27 cm.

French glove manufacturers traditionally label their products according to the digital system expressed in French inches. Most popular European sizes women's gloves are numbers from 6 to 8 and a half, for men's products - from 8 to 10 (according to the size of the palm girth in French inches). 1 inch is 2.71 cm.

How to determine the size of gloves: how to find out the size of the hand

Knowing the parameters of your hand, acquire the most suitable model it won't be difficult. To find out the size of gloves, measurements should be taken on the leading (writing) hand, which, as a rule, is somewhat wider in girth than the other. In this case, the following information should be taken into account - on the centimeter tape, on one side, a scale in centimeters is applied, on the other side - in inches. However, you should not rely on such measurements in inches, since English inches are used when marking the tape, and French inches are used when marking the size of the gloves.

How to determine the size of gloves: measuring the girth of the palm

It is not difficult to determine the size of gloves, focusing on the parameters of the hand - its girth in centimeters at the widest part.

The sequence of actions for measuring the width of the palm will look like this:

• first you need to comfortably position your hand - for this you need to raise it, relax and straighten your fingers up, as if you are going to wave to someone;
• in this position, you should wrap, without pulling tightly, a measuring tape around the widest part of the palm above thumb... As a rule, you will need to measure the width of the girth just below the little finger. It is not worth taking measurements from the bottom of the thumb;

• the result should be recorded. In accordance with this indicator, the size of the gloves should be selected.

For an adult, the average hand girth is about 20-25 cm, for children - up to 15 cm. The sizes of women's gloves vary from 16 to 30, for men - from 20 to 32. In addition, according to individual orders, manufacturers practice the manufacture of gloves large sizes- for women in the range of 24-30, for men - from 31 to 38 sizes.

For children, the appropriate size can be determined in the same way by measuring the width of the palm in centimeters. It is worth considering that there is no single standard for the size of children's gloves, as well as for adults. Nevertheless, it is quite possible to purchase children's gloves without trying them on. Most manufacturers of similar products offer dimensional grids, in which you can navigate both the age of the child and the indicator of the girth of the palm. For example, for a baby aged 1-2 years, size 1-1 is suitable, for a 2-3-year-old - 2nd, for 3-4 years old - 3rd, etc.

It is convenient to know your size of gloves in the European system of standards. It is not difficult to determine it according to this marking system - in order to convert it to inches, you will need to divide the measurement of the arm circumference in centimeters by 2.71 and round the result to the nearest 0.5 - to an integer. The resulting result will act as the desired size.

How to determine the size of gloves: measuring the length of the arm

Less popular for glove sizing is hand length measurement. Such measurements should be taken if your brush differs in a non-standard length or width.

To measure arm length, follow these steps:

• first, you need to raise your hand up and spread your fingers, as if you were about to wave to someone. Relax your hand slightly;
• then you can start measuring - for this you need to attach the end of the measuring tape to the upper end of the middle finger, and then measure the distance to the base of the palm.

The result obtained for the size of the gloved hand must be recorded. In the case when this indicator exceeds the length of the girth of the palm; to determine the size of the product, you will need to be guided by this figure.

How to determine the size of gloves: put on gloves correctly

It should be noted that if you don’t wear the glove correctly, there is a risk of stretching or tearing it. In order for it to fit properly on your hand, first wrap the cuff slightly and pull the glove over four fingers. After that, when the fingers are comfortably located in it, it remains to thread the thumb inward and spread it. Next, you need to gently smooth out the glove on your hand in order to remove the wrinkles.

Gloves size - photo

How to determine the size of gloves - video